Best relation (value) of rate and burst in TBF and HTB
Hi,
I'm going to setup a linux traffic control box and has decided to adapt HTB.
What should be the best relation(value) of rate and burst? I mean the formula used to calculate burst give rate or vice verse.
I think the bandwidth of NIC and CPU processing speed are also important in the calculation above. What else are important??
Thanks a lot,
Willim
__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · William
Hi,
I'm going to setup a linux traffic control box and has decided to adapt HTB.
Quoted 7 lines
What should be the best relation(value) of rate and burst? I mean the formula used to calculate burst give rate or vice verse.
I think the bandwidth of NIC and CPU processing speed are also important in the calculation above. What else are important??
Rate and burst do not really influence the CPU. The more classes you have, the more load it will give. But I once shaped 5.000 parallel streams on a 10mbit connection with 486, 25hz, 8MB ram. I used htb and the box survived the test without the load becoming bigger then 1.00.
If you use latest htb, you only need a rate parameter. The burst will be callulated for you.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/