htb qdisc on top of htb
Hi
I tryed to use a htb qdisc/class on top of another htb qdisc/class as you can see bellow:
#!/bin/bash
tc="/sbin/tc"
$tc qdisc del dev eth0 root
$tc qdisc add dev eth0 root handle 1: htb default 40
$tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit burst 15k
$tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50Mbit burst 15k $tc class add dev eth0 parent 1:1 classid 1:20 htb rate 256Kbit burst 15k $tc class add dev eth0 parent 1:1 classid 1:30 htb rate 50Mbit ceil 100Mbit burst 15k
$tc qdisc add dev eth0 parent 1:10 handle 10: htb default 20 $tc class add dev eth0 parent 10: classid 10:1 htb rate 50Mbit burst 15k
$tc class add dev eth0 parent 10:1 classid 10:10 htb rate 256Kbit $tc class add dev eth0 parent 10:1 classid 10:20 htb rate 1Mbit ceil 50Mbit
$tc filter add dev eth0 parent 1: protocol ip u32 match ip dst 1.2.3.4/32 flowid 10:10
The problem is I dont limited with 256 Kbit downloading from 1.2.3.4. If I change flowid from 10:10 to 1:20 I do get shaped so its not from a filter problem. Is it possible to use htb qdisc on top of htb qdisc ?
Thanks
PS: I am using last htb2
----------------------------
Mihai RUSU
Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Heh I solved the "problem" with a litle filters modification, see below:
Quoted 19 lines · Mihai RUSU
Hi
I tryed to use a htb qdisc/class on top of another htb qdisc/class as you can see bellow:
#!/bin/bashtc="/sbin/tc"
$tc qdisc del dev eth0 root
$tc qdisc add dev eth0 root handle 1: htb default 40
$tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit burst 15k$tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50Mbit burst 15k $tc class add dev eth0 parent 1:1 classid 1:20 htb rate 256Kbit burst 15k $tc class add dev eth0 parent 1:1 classid 1:30 htb rate 50Mbit ceil 100Mbit burst 15k
$tc qdisc add dev eth0 parent 1:10 handle 10: htb default 20 $tc class add dev eth0 parent 10: classid 10:1 htb rate 50Mbit burst 15k
Quoted 7 lines
$tc class add dev eth0 parent 10:1 classid 10:10 htb rate 256Kbit $tc class add dev eth0 parent 10:1 classid 10:20 htb rate 1Mbit ceil 50Mbit
$tc filter add dev eth0 parent 1: protocol ip u32 match ip dst 1.2.3.4/32 flowid 10:10
replaced the line above with:
$tc filter add dev eth0 parent 1: protocol ip u32 match ip dst 0.0.0.0/0 flowid 1:10 $tc filter add dev eth0 parent 10: protocol ip u32 match ip dst 1.2.3.4/32 flowid 10:10
----------------------------
Mihai RUSU
Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/