Skip to contentSkip to conversation

3 providers route - help me

LARTC rust 1 participant 1 message Aug 7, 2002

lore
Share & tools
lore

rust

author
#0 lore raw

Hello lartc,

Sorry for my english.
My conf: Linux kernel 2.4.18 + ipchains

I have:
1) eth1 - via SATelite only send data - with 195.x.x.2 and ISP1 ip 195.x.x.1
2) eth1:1 - via SATelite only recieve data - with 212.x.x.218 and ISP2 ip 212.x.x.217
3) eth0 - local network with 192.168.0.x
4) eth0:1 - local network with 192.168.1.x

Default gateway 212.x.x.217 eth1:1

Script for ipchains

/sbin/ipchains -F
/sbin/ipchains -A forward -s 192.168.0.1/24 -j MASQ /sbin/ipchains -A forward -s 192.168.1.1/24 -j MASQ

                         |---------------|
                         |               |        ISP2
                         |               |212.x.x.218    212.x.x.217
192.168.0.x   192.168.0.1|         eth1:1|<<<-----------------------
-------------------------|eth0           |
                         |               |        ISP1
192.168.1.x   192.168.1.1|               |195.x.x.2      195.x.x.1
-------------------------|eth0:1     eth1|----------------------->>>
                         |               |
                         |---------------|

All work fine.

Now we added new ISP3
1) eth3 - with ip 217.x.x.170 and ISP1 ip 217.x.x.169

Now new default gateway 217.x.x.169 with gatewaydev eth3

                           isp1 |217.x.x.169
                                |
                                |
                                |217.x.x.170
                         |---------------|
                         |     eth3      |           ISP2
                         |               |212.x.x.218    212.x.x.217
192.168.0.x   192.168.0.1|               |<<<-----------------------
-------------------------|eth0           |
                         |               |           ISP1
192.168.1.x   192.168.1.1|               |195.x.x.2      195.x.x.1
-------------------------|eth0:1         |----------------------->>>
                         |               |
                         |---------------|

Now I want to net 192.168.0.x use new ISP3, net 192.168.1.x use old ISP1 and ISP2

# Net 192.168.0.x default into main table
ip ru add pref 10 to 192.168.0.1/24 tab main

# Now incoming traffic from ISP2 - (ip 212.x.x.218) send to ISP1

# ip - 195.x.x.2
ip ru add pref 20 from 212.x.x.218 tab 201 
ip route add default via 195.x.x.2 dev eth1 table 201

# And now for net 192.168.0.x
ip rule add from 192.168.1.0/24 table 200
ip ro add default via 218.x.x.217 dev eth1 table 200

But now i see with tcpdump -i eth1 when ping www.list.ru from 192.168.1.x

11:53:25.367532 > my_linux_box > host1.list.ru: icmp: echo request 11:53:26.363947 > my_linux_box > host1.list.ru: icmp: echo request 11:53:27.375236 > my_linux_box > host1.list.ru: icmp: echo request 11:53:28.376499 > my_linux_box > host1.list.ru: icmp: echo request

And tcpdump -i eth3

11:53:25.796200 < host1.list.ru > my_linux_box: icmp: echo reply 11:53:26.832670 < host1.list.ru > my_linux_box: icmp: echo reply 11:53:27.815478 < host1.list.ru > my_linux_box: icmp: echo reply 11:53:28.752727 < host1.list.ru > my_linux_box: icmp: echo reply

Packets go to ISP1 and return over ISP3, but need go ISP1 and return over ISP2

Can you help me?? How configure routing in this conf??

Signature · 6 lines
Best regards,
 rust                          mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/