pb with ingress policy
Hi !
I have a single host which is connected via an 512kbit ADSL link to the net. I quite often use some realaudio application that uses some bandwidth and I want to avoid other traffic to scale that bandwidth down. So I used some classes (with htb) on imq0 device and applied some filters and it seems to work in most cases. However, there are some sites with which download is interrupted if bandwidth is limited. I tried to trace it down and did some simple test:
modprobe imq numdevs=1
tc qdisc add dev imq0 root handle 1: htb default 10
tc class add dev imq0 parent 1: classid 1:10 htb rate 60kbit ceil 512kbit burst 15k tc qdisc add dev imq0 parent 1:10 handle 10: sfq perturb 10
iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0
ip li set imq0 up
So now all traffic is limited to 60kbit. If I use some particular site for downloading (with wget) I observe the following with tcpdump:
At the beginning there is a huge burst (wget indicating something like 45 kbps) than speed decreases dramatically and achieves some equilibrium around 60kbit. Then for some reason after about 15 seconds my host sends FIN to the other site. Why ? ;-) Is that a problem with some queue being too full after the burst at the beginning ?
I tried to play with the burst option and I also used the pmtu stuff (iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu) without success.
Anyone having an idea ?
Kernel 2.4.19, iptables 1.2.6a.
Thank you
--
Thomas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi.
Quoted 11 lines · Thomas SPECK
Hi !
I have a single host which is connected via an 512kbit ADSL link to the net. I quite often use some realaudio application that uses some bandwidth and I want to avoid other traffic to scale that bandwidth down. So I used some classes (with htb) on imq0 device and applied some filters and it seems to work in most cases. However, there are some sites with which download is interrupted if bandwidth is limited. I tried to trace it down and did some simple test:
modprobe imq numdevs=1
tc qdisc add dev imq0 root handle 1: htb default 10
tc class add dev imq0 parent 1: classid 1:10 htb rate 60kbit ceil 512kbit burst 15k tc qdisc add dev imq0 parent 1:10 handle 10: sfq perturb 10
iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0
ip li set imq0 up
Quoted 2 lines
So now all traffic is limited to 60kbit. If I use some particular site for downloading (with wget) I observe the following with tcpdump:
At the beginning there is a huge burst (wget indicating something like 45 kbps) than speed decreases dramatically and achieves some equilibrium around 60kbit. Then for some reason after about 15 seconds my host sends FIN to the other site. Why ? ;-)
Hard to tell without seeing any data. Can you capture the session with tcpdump and put it online somewhere (or send it via email off-list) ?
Bye
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Thomas SPECK
Hi !
I have a single host which is connected via an 512kbit ADSL link to the net. I quite often use some realaudio application that uses some bandwidth and I want to avoid other traffic to scale that bandwidth down. So I used some classes (with htb) on imq0 device and applied some filters and it seems to work in most cases. However, there are some sites with which download is interrupted if bandwidth is limited. I tried to trace it down and did some simple test:
Quoted 8 lines
modprobe imq numdevs=1
tc qdisc add dev imq0 root handle 1: htb default 10
tc class add dev imq0 parent 1: classid 1:10 htb rate 60kbit ceil 512kbit burst 15k tc qdisc add dev imq0 parent 1:10 handle 10: sfq perturb 10 iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0
ip li set imq0 upSo now all traffic is limited to 60kbit.
You limit all traffic to 512 kbit with the ceil parameter, not 60 kbit. The rate is used when you have 2 or more child classes with the same parent.
Quoted 9 lines
If I use some particular site for
downloading (with wget) I observe the following with tcpdump: At the beginning there is a huge burst (wget indicating something like 45 kbps) than speed decreases dramatically and achieves some equilibrium around 60kbit. Then for some reason after about 15 seconds my host sends FIN to the other site. Why ? ;-) Is that a problem with some queue being too full after the burst at the beginning ? I tried to play with the burst option and I also used the pmtu stuff (iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu) without success.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 21 lines
Messsage du 07/08/2002 16:42
De : Patrick McHardy <[email protected]>
A : Thomas SPECK <[email protected]>
Copie à : <[email protected]>
Objet : Re: [LARTC] pb with ingress policyHi.
Quoted 11 lines · Thomas SPECK
Hi !
I have a single host which is connected via an 512kbit ADSL link to the net. I quite often use some realaudio application that uses some bandwidth and I want to avoid other traffic to scale that bandwidth down. So I used some classes (with htb) on imq0 device and applied some filters and it seems to work in most cases. However, there are some sites with which download is interrupted if bandwidth is limited. I tried to trace it down and did some simple test:
modprobe imq numdevs=1
tc qdisc add dev imq0 root handle 1: htb default 10
tc class add dev imq0 parent 1: classid 1:10 htb rate 60kbit ceil 512kbit burst 15k tc qdisc add dev imq0 parent 1:10 handle 10: sfq perturb 10
iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0
ip li set imq0 up
Quoted 6 lines
Quoted 2 lines
So now all traffic is limited to 60kbit. If I use some particular site for downloading (with wget) I observe the following with tcpdump:
At the beginning there is a huge burst (wget indicating something like 45 kbps) than speed decreases dramatically and achieves some equilibrium around 60kbit. Then for some reason after about 15 seconds my host sends FIN to the other site. Why ? ;-)Hard to tell without seeing any data. Can you capture the session with tcpdump and put it online somewhere (or send it via email off-list) ?
Unfortunately the site is down now, so I can't do any tests anymore. I tried to find some other site but without succces :(
I could reproduce it with realplayer but I am not sure if it is not realplayer shutting down and causing the FIN or the FIN causing realplayer to shut down ... (BTW I am not sure with wget as well, so could that all be an application problem ?)
If you would like to see the dump anyway, please let me know.
--
Thomas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 28 lines
Messsage du 07/08/2002 21:09
De : Stef Coene <[email protected]>
A : Thomas SPECK <[email protected]>, <[email protected]> Copie à :
Objet : Re: [LARTC] pb with ingress policyQuoted 17 lines · Thomas SPECK
Hi !
I have a single host which is connected via an 512kbit ADSL link to the net. I quite often use some realaudio application that uses some bandwidth and I want to avoid other traffic to scale that bandwidth down. So I used some classes (with htb) on imq0 device and applied some filters and it seems to work in most cases. However, there are some sites with which download is interrupted if bandwidth is limited. I tried to trace it down and did some simple test:
modprobe imq numdevs=1
tc qdisc add dev imq0 root handle 1: htb default 10
tc class add dev imq0 parent 1: classid 1:10 htb rate 60kbit ceil 512kbit burst 15k tc qdisc add dev imq0 parent 1:10 handle 10: sfq perturb 10 iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0
ip li set imq0 up
Quoted 3 lines
Quoted 1 line
So now all traffic is limited to 60kbit.
You limit all traffic to 512 kbit with the ceil parameter, not 60 kbit. The rate is used when you have 2 or more child classes with the same parent.
I would like to believe you but I observe even with one class, that traffic is decreasing to something around 60kbit. Is there something I am doing wrong ? BTW looking into the howto I wonder if it is a good idea to set ceil for ingress to the maximum rate I get.
--
Thomas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
Quoted 3 lines
You limit all traffic to 512 kbit with the ceil parameter, not 60 kbit. The rate is used when you have 2 or more child classes with the same parent.
I would like to believe you but I observe even with one class, that traffic is decreasing to something around 60kbit. Is there something I am doing wrong ? BTW looking into the howto I wonder if it is a good idea to set ceil for ingress to the maximum rate I get.
You have to put the ceil to 99% of the link in both directions so the hugh filters in the modem are not used. But the 512 kbit ceil works. I did some htb tests (http://www.docum.org/stef.coene/qos/tests/htb/index.html) and the results are very accurate. What if you remove the sfq qdisc and/or take other values for rate/ceil?
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/