Skip to contentSkip to conversation

HTB3 big problem

LARTC Daniel Sercaianu 2 participants 2 messages Aug 14, 2002

lore
Share & tools
lore
#0 lore raw

With the following setup I can get maxim of 4Mbit bandwidth when downloading to ip dst 10.0.0.1. When I remove the shapers it works at full 100Mbit.
What could be the problem?

tc -s -d class ls dev eth0

class htb 1:1 root rate 100Mbit ceil 100Mbit burst 2031b/8 mpu 0b cburst 132644b/8 mpu 0b level 7
Sent 30473118 bytes 20564 pkts (dropped 0, overlimits 0) rate 394194bps 261pps
lended: 0 borrowed: 0 giants: 0
tokens: -155 ctokens: 8009

class htb 1:2 parent 1:1 leaf 10: prio 5 quantum 200000 rate 50Mbit ceil 50Mbit burst 2Kb/8 mpu 0b cburst 67121b/8 mpu 0b level 0
Sent 30524594 bytes 20598 pkts (dropped 0, overlimits 0) rate 395529bps 262pps backlog 34p
lended: 20564 borrowed: 0 giants: 0
tokens: -309 ctokens: 7827

class htb 1:3 parent 1:1 leaf 20: prio 5 quantum 1638 rate 128Kbit ceil 128Kbit burst 2Kb/8 mpu 0b cburst 1762b/8 mpu 0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 102400 ctokens: 88149

To kernel-2.4.18 I applied the following patches:
htb3.6_2.4.17.diff
imq-2.4.18.diff-10
iptables-1.2.6a-imq

/sbin/tc qdisc del dev eth0 root
/sbin/tc qdisc add dev eth0 root handle 1: htb default 200 /sbin/tc class add dev eth0 parent 1:0 classid 1:1 htb\
rate 100Mbit ceil 100Mbit burst 2k prio 5

/sbin/tc filter add dev eth0 parent 1:0 protocol ip\
prio 5 handle 1: u32 divisor 256

/sbin/tc class add dev eth0 parent 1:1 classid 1:2 htb\
rate 50Mbit ceil 50Mbit burst 2k prio 5
/sbin/tc qdisc add dev eth0 parent 1:2 handle 10: sfq quantum 1514 perturb 10 /sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 5 u32 \
match ip dst 10.0.0.1 flowid 1:2

/sbin/tc filter add dev eth0 parent 1:0 prio 5\
handle ::1 u32 ht 800:: match ip nofrag\
offset mask 0x0F00 shift 6\
hashkey mask 0x00ff0000 at 8 link 1:

Daniel Sercaianu
Terranet Virtual Media
[email protected]
GSM +40 788 837723

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hello Daniel,
Increase burst value or simple don't set it,
htb calculate it for you.

Wednesday, August 14, 2002, 3:56:29 PM, you wrote:

DS> With the following setup I can get maxim of 4Mbit bandwidth when DS> downloading to ip dst 10.0.0.1. When I remove the shapers it works at DS> full 100Mbit.
DS> What could be the problem?

DS> tc -s -d class ls dev eth0

DS> class htb 1:1 root rate 100Mbit ceil 100Mbit burst 2031b/8 mpu 0b cburst DS> 132644b/8 mpu 0b level 7

DS>  Sent 30473118 bytes 20564 pkts (dropped 0, overlimits 0)
DS>  rate 394194bps 261pps
DS>  lended: 0 borrowed: 0 giants: 0
DS>  tokens: -155 ctokens: 8009

DS> class htb 1:2 parent 1:1 leaf 10: prio 5 quantum 200000 rate 50Mbit ceil DS> 50Mbit burst 2Kb/8 mpu 0b cburst 67121b/8 mpu 0b level 0

DS>  Sent 30524594 bytes 20598 pkts (dropped 0, overlimits 0)
DS>  rate 395529bps 262pps backlog 34p
DS>  lended: 20564 borrowed: 0 giants: 0
DS>  tokens: -309 ctokens: 7827

DS> class htb 1:3 parent 1:1 leaf 20: prio 5 quantum 1638 rate 128Kbit ceil DS> 128Kbit burst 2Kb/8 mpu 0b cburst 1762b/8 mpu 0b level 0

DS>  Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
DS>  lended: 0 borrowed: 0 giants: 0
DS>  tokens: 102400 ctokens: 88149

DS> To kernel-2.4.18 I applied the following patches:
DS> htb3.6_2.4.17.diff
DS> imq-2.4.18.diff-10
DS> iptables-1.2.6a-imq

DS> /sbin/tc qdisc del dev eth0 root
DS> /sbin/tc qdisc add dev eth0 root handle 1: htb default 200 DS> /sbin/tc class add dev eth0 parent 1:0 classid 1:1 htb\
DS> rate 100Mbit ceil 100Mbit burst 2k prio 5

DS> /sbin/tc filter add dev eth0 parent 1:0 protocol ip\
DS> prio 5 handle 1: u32 divisor 256

DS> /sbin/tc class add dev eth0 parent 1:1 classid 1:2 htb\
DS> rate 50Mbit ceil 50Mbit burst 2k prio 5
DS> /sbin/tc qdisc add dev eth0 parent 1:2 handle 10: sfq quantum 1514 perturb 10 DS> /sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 5 u32 \
DS> match ip dst 10.0.0.1 flowid 1:2

DS> /sbin/tc filter add dev eth0 parent 1:0 prio 5\

DS>   handle ::1 u32 ht 800:: match ip nofrag\
DS>   offset mask 0x0F00 shift 6\
DS>   hashkey mask 0x00ff0000 at 8 link 1:

DS> Daniel Sercaianu
DS> Terranet Virtual Media
DS> [email protected]
DS> GSM +40 788 837723

DS> _______________________________________________
DS> LARTC mailing list / [email protected]
DS> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/