Skip to contentSkip to conversation

LARTC digest, Vol 1 #735 - 3 msgs

LARTC [email protected] 1 participant 1 message Aug 23, 2002

lore
Share & tools
lore
#0 lore raw

I will be out of the office from 8/19 until 8/23. I will be returning on Monday afternoon, 8/26, and will reply then.

Thank you,

Michael Pellegrino
Softerware, Inc.

___________________________________________________________________________
Subject: LARTC digest, Vol 1 #735 - 3 msgs
From: [email protected]
Date: 08/23/02 01:27:45

Send LARTC mailing list submissions to
[email protected]

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.ds9a.nl/mailman/listinfo/lartc
or, via email, send a message with subject or body 'help' to
[email protected]

You can reach the person managing the list at
[email protected]

When replying, please edit your Subject line so it is more specific than "Re: Contents of LARTC digest..."

Today's Topics:

1. Re: Q: best solution to stop traffic to huge amount of unregisteredhosts (Gerry Creager N5JXS)
2. psched_tod_diff function (Pedro Larroy)
3. Re: HTB is in 2.4.20pre1,2 (Pedro Larroy)

--__--__--

Message: 1
Date: Thu, 22 Aug 2002 19:02:26 -0500
From: Gerry Creager N5JXS <[email protected]>
Reply-To: [email protected]
Organization: Da House
To: Karl Gaissmaier <[email protected]>
Cc: Linux Advanced Routing & Traffic Control <[email protected]>
Subject: Re: [LARTC] Q: best solution to stop traffic to huge amount of unregisteredhosts

Quoted 7 lines · Karl Gaissmaier
Quoted 5 lines · Gerry Creager N5JXS schrieb:

The answers are not necessarily pretty.

I've done a similar task with a Juniper M5 router. It will handle up to about 180,000 rules at wire speed. But it is expensive.

Quoted 6 lines
Quoted 2 lines

If your switches were a little newer, we could use 802.1x to enable the switch-use capability flag (:-) and solve the problem.

you know, 10k hosts are never attached to a network with homogenous new network devices :-(

Unfortunately, I do. We have 50k hosts, more or less, on 2 class B address spaces. We have about 200 buildings, and I'm not sure how many wiring closet switches. And worse, yet, how many wiring closet hubs!

Our (switched) dorm hosts are about 10k.

So, I understand the issues. The comment about newer gear, and 802.1x, however, stands. This will provide some capability to handle registered hosts in the future, perhaps... but I remain skeptical.

Quoted 6 lines
Quoted 3 lines

Instead of policing at a single edge point, you might consider policing at dormatory and building edges, where the load is smaller and you can use masking and diminsh the ruleset some more.

but the management is very difficult, see above

Correct, but you have several management issues. One is unnecessary delays while filtering, marking and queuing. Another is device configuration. I've found little existing useful software for real-life multiple device (and heterogeneous device) management. And none I'm willing to pay for. I _do_ have a team of graduate students who are working on a heterogeneous-environment configuration tool, but it's not nearly ready for prime time.

Quoted 9 lines
Quoted 3 lines

With a sufficiently fast box, or series of boxes, doing specific tasks, you should be able to do this. Folks like Juniper achieve it by being able to classify and mark in ASIC without having to go to the processor.

Netfilter and iproute2/tc is very good but I miss just a fast matching module for a "pool" of ip addresses and the missing tc-cref or better documented tc examples, especially dealing with general ingress policing.

We have experimented with A Juniper M5, as a shaping and filtering box for specific applications. It worked well in the tests, but is an expensive toy for this. You might consider a Sitara box for some off your work.

I prefer the Linux approach, too, but there are times where scalability, due to the state of the art (and certainly not for want of advancement in the state of the art!) means a commercial solution. What HAS happened, though, is that my expectations for the commercial products are now higher than they were... and the salesmen are somewhat worried.

Regards,
Gerry

--__--__--

Message: 2
Date: Fri, 23 Aug 2002 04:33:31 +0200
To: [email protected]
From: Pedro Larroy <[email protected]>
Subject: [LARTC] psched_tod_diff function

Hi
I don't understand what psched_tod_diff function in net/sched/sch_api.c does, so I don't know what PSCHED_TDIFF_SAFE does in sch_tbf.c

Any help will be apreciated.

Signature · 15 lines
 ... ___________________________________________________________ ...
|   /|                                                         |\   | 
|  /-| Pedro Larroy Tovar. PiotR | http://omega.resa.es/piotr  |-\  |
| /--|            No MS-Office attachments please.             |--\ |
o-|--|              e-mail: [email protected]                |--|-o 
|  \-|    finger [email protected] for public key and info   |-/  | 
|...\|_________________________________________________________|/...| 

--__--__--

Message: 3
Date: Fri, 23 Aug 2002 04:36:12 +0200
To: [email protected]
Subject: Re: [LARTC] HTB is in 2.4.20pre1,2
From: Pedro Larroy <[email protected]>
Quoted 6 lines · devik

Hi,
for those who haven't realized it yet. It is in 2.4.20pre2, 2.5.xx, should go into new iproute2 package and I have informations about possibility to have it in 2.2 soon.

devik

Congratulations devik :)

Regards.

Signature · 23 lines
 ... ___________________________________________________________ ...
|   /|                                                         |\   | 
|  /-| Pedro Larroy Tovar. PiotR | http://omega.resa.es/piotr  |-\  |
| /--|            No MS-Office attachments please.             |--\ |
o-|--|              e-mail: [email protected]                |--|-o 
|  \-|    finger [email protected] for public key and info   |-/  | 
|...\|_________________________________________________________|/...| 


--__--__--

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc


End of LARTC Digest


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/