questiona about CBQ algorithm in Linux
Hello!
Quoted 2 lines
average), how about Linux implemenatation about estimator? also do you have link for this algorithm? I canot find it.
The questions are answered in papers, references are in comments in sch_cbq.c, look at http://www.icir.org/floyd/cbq.html
Quoted 2 lines
3. In linux how CBQ measure used bandwidth per class? does it measure bandwith bits/sec?
No, it does not measure bandwdith at all. Read papers, please.
Quoted 1 line
7. Can HTB do the same job as CBQ right now, can HTB do borrow ?
Yes, it does. And does it better than CBQ.
Alexey
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello Alex
Sorry for my stubborn question. I read the S.Floyd paer "Link-sharing and resource mamagement...." On page 5, they said" The estimator estimates the bandwidth used byeach class over the appropriate time interval, to determine whether or not each class has been receiveing its link -sharing bandwidth..."
Also as I know CBQ building block, they have general scheduler, link-sharing scheduler, estimater, classifier etc. complonents.
This is why I ask you how about its implementation in linux. I read the sch_cbq.c comments, not quite sure one line" Linux has no EOI event, so that we ca not estimater true idle class idle time..."
what's EOI event, This is why in Linux, CBQ canot measure bandwidth?
regards
yuxiao
----- Original Message -----
From: <[email protected]>
To: "yuxiao" <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Friday, September 06, 2002 11:31 AM
Subject: Re: questiona about CBQ algorithm in Linux
Quoted 12 lines
Hello!
Quoted 2 lines
average), how about Linux implemenatation about estimator? also do you have link for this algorithm? I canot find it.
The questions are answered in papers, references are in comments in
sch_cbq.c, look at http://www.icir.org/floyd/cbq.htmlQuoted 2 lines
3. In linux how CBQ measure used bandwidth per class? does it measure bandwith bits/sec?
Quoted 8 lines
No, it does not measure bandwdith at all. Read papers, please.
Quoted 1 line
7. Can HTB do the same job as CBQ right now, can HTB do borrow ?
Yes, it does. And does it better than CBQ.
Alexey
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello!
Quoted 5 lines
Sorry for my stubborn question. I read the S.Floyd paer "Link-sharing and resource mamagement...." On page 5, they said" The estimator estimates the bandwidth used byeach class over the appropriate time interval, to determine whether or not each class has been receiveing its link -sharing bandwidth..."
Appendix A.
Quoted 3 lines
sch_cbq.ccomments, not quite sure one line" Linux has no EOI event, so that we ca not estimater true idle class idle time..."
what's EOI event, This is why in Linux, CBQ canot measure bandwidth?
No. No OSes have "EOI event". :-)
CBQ does not measure bandwidth because it does not need it. Period. Listen, please, do not waste your time for useless phylosophical meditations, read the paper instead.
Alexey
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi yuxiao,
Quoted 8 lines · yuxiao
Hello Alex
Sorry for my stubborn question. I read the S.Floyd paer "Link-sharing and resource mamagement...." On page 5, they said" The estimator estimates the bandwidth used byeach class over the appropriate time interval, to determine whether or not each class has been receiveing its link -sharing bandwidth..."
Quoted 7 lines
Also as I know CBQ building block, they have general scheduler, link-sharing scheduler, estimater, classifier etc. complonents.
This is why I ask you how about its implementation in linux. I read the
sch_cbq.ccomments, not quite sure one line" Linux has no EOI event, so that we ca not estimater true idle class idle time..."
what's EOI event, This is why in Linux, CBQ canot measure bandwidth?
Alexey meant EndOfInterrupt probably - the timepoint when a packet finally leaved NIC. It is needed to compute and measure inderpacket times - these are used as guide whether are we over/underlimit.
When I started to write first HTB version I spent one YEAR of thinking - so that don't expect to understand all nuances so fast :)
The main problems when implementing CBQ as described in Floyd paper (Appendix A - interpacked delay measure) is that you don;t have precise time reference. Alexey used trick in sch_cbq
- used NIC as time source ;)
HTB is direct implementation of Floyd's formal sharing and uses leaky buckets as estimators - they are not so sensitive to less precise timing.
Also you should note that original CBQ really didn't measure bw, it rather tries to correct deviations from expected interpacket delay.
regards, devik
Quoted 28 lines
regards
yuxiao
----- Original Message -----
From: <[email protected]>
To: "yuxiao" <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Friday, September 06, 2002 11:31 AM
Subject: Re: questiona about CBQ algorithm in LinuxQuoted 17 lines
Hello!
Quoted 2 lines
average), how about Linux implemenatation about estimator? also do you have link for this algorithm? I canot find it.
The questions are answered in papers, references are in comments in
sch_cbq.c, look at http://www.icir.org/floyd/cbq.htmlQuoted 2 lines
3. In linux how CBQ measure used bandwidth per class? does it measure bandwith bits/sec?
No, it does not measure bandwdith at all. Read papers, please.
Quoted 1 line
7. Can HTB do the same job as CBQ right now, can HTB do borrow ?
Quoted 9 lines
Quoted 3 lines
Yes, it does. And does it better than CBQ.
Alexey
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
heh you was a bit faster Alexey ;-)
Quoted 17 lines · On Mon, 9 Sep 2002 [email protected] wrote:
Hello!
Quoted 5 lines
Sorry for my stubborn question. I read the S.Floyd paer "Link-sharing and resource mamagement...." On page 5, they said" The estimator estimates the bandwidth used byeach class over the appropriate time interval, to determine whether or not each class has been receiveing its link -sharing bandwidth..."
Appendix A.
Quoted 3 lines
sch_cbq.ccomments, not quite sure one line" Linux has no EOI event, so that we ca not estimater true idle class idle time..."
what's EOI event, This is why in Linux, CBQ canot measure bandwidth?No. No OSes have "EOI event". :-)
Quoted 10 lines
CBQ does not measure bandwidth because it does not need it. Period. Listen, please, do not waste your time for useless phylosophical meditations, read the paper instead.
Alexey
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/