Skip to contentSkip to conversation

Counters of CLASSes HTB

LARTC Xor 2 participants 2 messages Sep 9, 2002

lore
Share & tools
lore

Xor

author
#0 lore raw

Hello, Nick.

You wrote Monday, September 09, 2002, 9:22:10 AM:

N> Hi,
N> Isn't the usual way of collecting stats of this kind, you get the
N> value when you start monitoring and then the value when you want to stop N> and take the difference. This way if you want measurements of different N> periods its only the programs doing the measureing that change not the N> device producing the readings, and you can have multiple readers of N> different periods.

... and what about overlimit counters ? Example: counters was max values two (or more) time every some times ? I will not argue... I understand that can to do read different more often, but reset counters is more suitable %)

PS. thanks!

Quoted 10 lines · Xor
Quoted 10 lines

Can I reset "Sent bytes and pkts" into zero(0) without recreate class ? I want to collect traffic statistic from classes (very comfortable...) by method "every night get this values for traffic logs and resets its".
If not, may by somebody known better method without recreate class ? And this post is IDEA to do new feature in HTB ;)
Example:
tc class reset dev imq0 classid 1:1

Signature · 7 lines
 Xor                          mailto:[email protected]



_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 12 lines · Xor

Hello, Nick.

You wrote Monday, September 09, 2002, 9:22:10 AM:

N> Hi,
N> Isn't the usual way of collecting stats of this kind, you get
the N> value when you start monitoring and then the value when you want to stop N> and take the difference. This way if you want measurements of different N> periods its only the programs doing the measureing that change not the N> device producing the readings, and you can have multiple readers of N> different periods.

Quoted 4 lines

... and what about overlimit counters ? Example: counters was max values two (or more) time every some times ? I will not argue... I understand that can to do read different more often, but reset counters is more suitable %)

That's not such an issue if you read the counters fast enough. If you read the counters each 5 minutes, you know quite accurate when they are resetted and you will not loose that much data.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/