Skip to contentSkip to conversation

This simple ingress script blocks my traffic

LARTC Ludovic Drolez 1 participant 1 message Sep 13, 2002

lore
Share & tools
lore
#0 lore raw

Hi !

I have a 56k modem internet connection and I want to control the BW of ftp downloads. But when I run the following script, my downloads are simply stopped (and they resume if I clear the rules):

-----------------
#!/bin/sh
DEV=ppp0
DOWNLINKkbit
/sbin/ipchains -A input -i $DEV -p tcp -s 0/0 ftp-data -m 1
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null tc qdisc add dev $DEV handle ffff: ingress

tc filter add dev $DEV parent ffff: protocol ip prio 50 handle \
1 fw police rate $DOWNLINK burst 3000 mtu 1500 drop flowid :1
------------------

I have a Debian woody with the 2.4.18-k6 kernel. All modules are loaded (cls_u32, cls_fw, sch_ingress, ...)
I get the same result If I try an "u32" match instead of a firewall mark match.
When I tcpdump, it seems that the application does not receive incoming packets.
When I ask for qdisc stats, it answers me
"Sent 0 bytes 0 pkts (dropped 0, overlimits 0)"

Any clue ?

TIA,

Ludovic.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/