the quantem of class 10001 is big
imq and htb are used to control traffic.
#tc qdisc add dev imq0 root handle 1: htb default 0 #tc class add dev $IMQDEV parent 1: classid 1:1 htb \
rate 10000kbps ceil 10000kbps burst 15k
I get the following messages:
HTB quantum of class 1001 is big.consider r2q change <7>htb*g jA29006
what is the reasonable range of rate ,or I have to set which parameter to set rate up to 10M(even 100M)
_________________________________________________________
Do You Yahoo!?
新鲜到底,娱乐到家 - 雅虎推出免费娱乐电子周报!
http://cn.ent.yahoo.com/newsletter/index.html
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · hanhbnetfilter
imq and htb are used to control traffic.
#tc qdisc add dev imq0 root handle 1: htb default 0 #tc class add dev $IMQDEV parent 1: classid 1:1 htb \
rate 10000kbps ceil 10000kbps burst 15kI get the following messages:
HTB quantum of class 1001 is big.consider r2q change <7>htb*g j=4129006
what is the reasonable range of rate ,or I have to set which parameter to set rate up to 10M(even 100M)
If you want more info about quantum, checkout the faq page on www.docum.org.
1500 < quantum = rate / r2q (=10) < 60.000
- r2q can be overruled when you add the cbq qdisc
- quantum can be overruled when you add the cvq class
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/