Skip to contentSkip to conversation

An example of prio qdisc please...

LARTC Emmanuel Lacour 5 participants 10 messages Sep 24, 2002 – Sep 26, 2002

lore
Share & tools
lore
#0 lore raw

I simply wan't to give higher priority for esp protocol.

Could someone give me an example (I think using prio qdisc and u32 filter???)

Signature · 7 lines
Easter-eggs                                Spécialiste GNU/Linux
44-46 rue de l'Ouest  -  75014 Paris   -   France -  Métro Gaité
Phone: +33 (0) 1 43 35 00 37    -     Fax: +33 (0) 1 41 35 00 76
mailto:[email protected]   -    http://www.easter-eggs.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3 1 1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip protocol 0xXX 0xff flowid 1:1

have you read the docs? If not, do so to understand how it works and what the quirks are. http://www.lartc.org/

----- Original Message -----
From: "Emmanuel Lacour" <[email protected]>
To: <[email protected]>
Sent: Tuesday, September 24, 2002 5:50 PM
Subject: [LARTC] An example of prio qdisc please...

Quoted 7 lines

I simply wan't to give higher priority for esp protocol.

Could someone give me an example (I think using prio qdisc and u32 filter???)

Quoted 9 lines

--
Easter-eggs Spécialiste GNU/Linux
44-46 rue de l'Ouest - 75014 Paris - France - Métro Gaité
Phone: +33 (0) 1 43 35 00 37 - Fax: +33 (0) 1 41 35 00 76
mailto:[email protected] - http://www.easter-eggs.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Emmanuel Lacour
Quoted 9 lines · Soulfly

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3 1 1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip protocol 0xXX 0xff flowid 1:1

Quoted 4 lines

have you read the docs? If not, do so to understand how it works and what the quirks are. http://www.lartc.org/

Of course, I did it already, the lartc howto is a really good doc, but all of this is not really easy so by giving me this example I will be able to understand more and do what I wan't.

Thanks!

Signature · 7 lines
Easter-eggs                                Spécialiste GNU/Linux
44-46 rue de l'Ouest  -  75014 Paris   -   France -  Métro Gaité
Phone: +33 (0) 1 43 35 00 37    -     Fax: +33 (0) 1 41 35 00 76
mailto:[email protected]   -    http://www.easter-eggs.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Emmanuel Lacour
Quoted 8 lines · "Soulfly" <[email protected]> thus wrote:

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3 1 1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip protocol 0xXX 0xff flowid 1:1

Hi there
This is ver infornmative
I've long wanted priority of some protocol over the other. Now my question is:
Can i use this with htb?

I want:
o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
o protocol 23 priority over protocol 80

U see, I don't want to limit "protocol 80" to some bandwidth restriction so that "protocol 23" gets the rest available bandwidth I just want "proto 23" packets priority over "proto 80"

In the above example u used the "prio" qdisc Can i use this with my htb as the roo qdisc and prio lower down in the class?

Thanx

--
arc_of_descent
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Emmanuel Lacour

I'm happy to help! I just want to make sure you've know the basics so you don't fall into pitholes. Examples is one of the best sources of information.

Oh I didn't look up the number for your protocol, so exchange the 'XX' with this.

----- Original Message -----
From: "Emmanuel Lacour" <[email protected]>
To: "Soulfly" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, September 25, 2002 11:18 AM
Subject: Re: [LARTC] An example of prio qdisc please...

Quoted 2 lines · Soulfly
Quoted 1 line

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3

3 1

Quoted 6 lines
Quoted 6 lines

1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10 tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip

protocol

Quoted 3 lines
Quoted 3 lines

0xXX 0xff flowid 1:1

have you read the docs? If not, do so to understand how it works and

what

Quoted 10 lines
Quoted 3 lines

the quirks are. http://www.lartc.org/

Of course, I did it already, the lartc howto is a really good doc, but all of this is not really easy so by giving me this example I will be able to understand more and do what I wan't.

Thanks!

Quoted 9 lines

--
Easter-eggs Spécialiste GNU/Linux
44-46 rue de l'Ouest - 75014 Paris - France - Métro Gaité
Phone: +33 (0) 1 43 35 00 37 - Fax: +33 (0) 1 41 35 00 76
mailto:[email protected] - http://www.easter-eggs.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#5 lore raw
In reply to Emmanuel Lacour
Quoted 3 lines
Quoted 1 line · "Soulfly" <[email protected]> thus wrote:

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3

3 1

Quoted 6 lines
Quoted 6 lines

1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10 tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip

protocol

Quoted 2 lines
Quoted 1 line

0xXX 0xff flowid 1:1

I have a configuration which use 5 prio levels (2 above the standard priolevels). I conerted it to 4 and forgot to alter the band parameter.. so the correct line is..

tc qdisc add dev eth0 root handle 1: prio bands 4 priomap 2 3 2 2 3 3 3 3 1 1 1 1 2 2 2 2

Quoted 11 lines

Hi there
This is ver infornmative
I've long wanted priority of some protocol over the other. Now my question is:
Can i use this with htb?

I want:
o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
o protocol 23 priority over protocol 80

Quoted 8 lines

U see, I don't want to limit "protocol 80" to some bandwidth restriction so that "protocol 23" gets the rest available bandwidth I just want "proto 23" packets priority over "proto 80"

In the above example u used the "prio" qdisc Can i use this with my htb as the roo qdisc and prio lower down in the class?

Yes, this should work out well. I suggest you add prio qdisc to the leafs in your htb class-tree.

Quoted 2 lines

Thanx

no problem

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#6 lore raw
In reply to Emmanuel Lacour
Quoted 21 lines · Rohan Almeida
Quoted 8 lines · "Soulfly" <[email protected]> thus wrote:

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3 3 1 1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10
tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10
tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10
tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10
tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip protocol 0xXX 0xff flowid 1:1

Hi there
This is ver infornmative
I've long wanted priority of some protocol over the other. Now my question is:
Can i use this with htb?

I want:
o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
o protocol 23 priority over protocol 80

Quoted 7 lines

U see, I don't want to limit "protocol 80" to some bandwidth restriction so that "protocol 23" gets the rest available bandwidth I just want "proto 23" packets priority over "proto 80"

In the above example u used the "prio" qdisc Can i use this with my htb as the roo qdisc and prio lower down in the class?

Yes, you can add the prio qdisc on a htb class.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#7 lore raw
In reply to Emmanuel Lacour

correct me if im wrong, but couldn't u achieve the same goal only with htb?

i mean by creating a leave-level with classes rateps, ceil=maxbw, prio 0-6

and attaching sfq/pfifo as leave-qdiscs to these classes?

s.th. like:
tc qdisc root handle 1:0 htb
tc class parent 1:0 handle 1:1 rate <maxuploadbw>
tc class parent 1:1 handle 1:10 rate 1bps ceil <maxuploadbw> prio 0
tc class parent 1:1 handle 1:11 rate .... ... .. prio 1
and so on
tc qdisc parent 1:10 handle 10:0 pfifo/sfq
tc qdisc parent 1:11 handle 11:0 ....
and so on
tc filter 1:0 protocol ip prio 0 handle 9999 fw classid 1:10 (syntax is not correct :)
and/or other filters

doesn't do this setup the same as the priomap (in general)?

Greetings

Tobias

Quoted 35 lines · Rohan Almeida
Quoted 21 lines
Quoted 1 line · "Soulfly" <[email protected]> thus wrote:

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3

3 3 3 1 1 1 1 2 2 2 2

Quoted 5 lines

tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10 tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip

protocol 0xXX 0xff flowid 1:1

Hi there
This is ver infornmative
I've long wanted priority of some protocol over the other. Now my question is:
Can i use this with htb?

I want:
o ip 172.16.0.5 bandwidth restriction of 32 kbps (htb ceil)
o ip 172.16.0.49 bandwidth restriction of 64 kbps (htb ceil)
o protocol 23 priority over protocol 80

Quoted 7 lines

U see, I don't want to limit "protocol 80" to some bandwidth restriction so that "protocol 23" gets the rest available bandwidth I just want "proto 23" packets priority over "proto 80"

In the above example u used the "prio" qdisc Can i use this with my htb as the roo qdisc and prio lower down in the class?

Yes, you can add the prio qdisc on a htb class.

Stef

--

Quoted 8 lines

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#8 lore raw
In reply to Emmanuel Lacour
Quoted 6 lines · Tobias Geiger

correct me if im wrong, but couldn't u achieve the same goal only with htb?

i mean by creating a leave-level with classes rate=1bps, ceil=maxbw, prio 0-6

and attaching sfq/pfifo as leave-qdiscs to these classes?

Yes and it's even better. With cbq you can give the all classes a minimum bandwidth so one class can not kill an other by using all bandwidth. With prio, you can generate a lot of traffic in the highest band so the other bands have no bandwidth left.

Quoted 13 lines

s.th. like:
tc qdisc root handle 1:0 htb
tc class parent 1:0 handle 1:1 rate <maxuploadbw>
tc class parent 1:1 handle 1:10 rate 1bps ceil <maxuploadbw> prio 0
tc class parent 1:1 handle 1:11 rate .... ... .. prio 1
and so on
tc qdisc parent 1:10 handle 10:0 pfifo/sfq
tc qdisc parent 1:11 handle 11:0 ....
and so on
tc filter 1:0 protocol ip prio 0 handle 9999 fw classid 1:10 (syntax is not correct :)
and/or other filters

Quoted 1 line

doesn't do this setup the same as the priomap (in general)?

It's not the same, but you can get the same result.
Remember, prio is only for excess bandidth. So each class will get's at least his rate and the class with the lowest prio will get the remaining bandwidth.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#9 lore raw
In reply to Emmanuel Lacour
Quoted 14 lines · Soulfly
Quoted 3 lines
Quoted 1 line · "Soulfly" <[email protected]> thus wrote:

tc qdisc add dev eth0 root handle 1: prio bands 5 priomap 2 3 2 2 3 3 3

3 1

Quoted 6 lines
Quoted 6 lines

1 1 1 2 2 2 2
tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10 tc qdisc add dev eth0 parent 1:4 handle 40: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1: prio 10 u32 match ip

protocol

Quoted 2 lines
Quoted 1 line

0xXX 0xff flowid 1:1

Quoted 7 lines

I have a configuration which use 5 prio levels (2 above the standard priolevels). I conerted it to 4 and forgot to alter the band parameter.. so the correct line is..

tc qdisc add dev eth0 root handle 1: prio bands 4 priomap 2 3 2 2 3 3 3 3 1 1 1 1 2 2 2 2

Here is my net config:

LAN1->(eth1)ipsec_gw1(ppp0)---------------(ppp0)ipsec_gw2(eth1)<-LAN2

                                                    ^
						    |
						 server

Ok, so I tried this:

tc qdisc del dev ppp0 root
tc qdisc add dev ppp0 root handle 1: prio
tc qdisc add dev ppp0 parent 1:1 handle 10: sfq perturb 10 tc qdisc add dev ppp0 parent 1:2 handle 20: sfq perturb 10 tc qdisc add dev ppp0 parent 1:3 handle 30: sfq perturb 10 tc filter add dev ppp0 protocol ip parent 1: prio 10 u32 match ip protocol 0x50 0xff flowid 1:1

I did it on my too ipsec-end gateway

so if from I connect from LAN1 to LAN2 via ssh, all traffic go in 10:, and when I ftp from LAN1 to the server directly through internet (no tunnel), traffic go in 30:

But this doesn't change anything, ssh is as slow as without prio when I do ftp????

Where is my probably qos conception error??

Thanks for any help.

Signature · 7 lines
Easter-eggs                                Spécialiste GNU/Linux
44-46 rue de l'Ouest  -  75014 Paris   -   France -  Métro Gaité
Phone: +33 (0) 1 43 35 00 37    -     Fax: +33 (0) 1 41 35 00 76
mailto:[email protected]   -    http://www.easter-eggs.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/