pfifo_fast dosnt work?
Hep
Trying to get pfifo to work. Setup :
|------|<--->eth1 (192.168.10.0/24)
eth0---| GW |<--->eth2 (192.168.11.0/24)
|------|<--->eth3 (192.168.12.0/24)read all documentation :
http://lartc.org/howto/lartc.cookbook.interactive-prio.html
here is my TOS mangling rulse in iptables :
$IPTABLES -A PREROUTING -i eth1 -t mangle -s 192.168.10.0/24 -p tcp --dport ftp-data -m state --state NEW,ESTABLISHED -j TOS --set-tos Maximize-Throughput $IPTABLES -A PREROUTING -i eth1 -t mangle -s 192.168.10.0/24 -p tcp --sport 44100:44200 -m state --state NEW,ESTABLISHED -j TOS --set-tos Maximize-Throughput $IPTABLES -A PREROUTING -i eth1 -t mangle -s 192.168.10.0/24 -p tcp --dport ftp -m state --state NEW,ESTABLISHED -j TOS --set-tos Minimize-Delay
Im trying to limited the ftp-data throughoutput by putting all ftp-data in band 2. Ive checked with tcpdump -v -v |grep tos and yes ftp-data get [tos 0x8] which destination is band 2 if i read the documentation right?
Allthough everything is set ok all my interactiv traffic ssh/telnet etc is very slow and sloppy when someone uploads to our ftpserver.
Im running kernel 2.4.19 with latest patch-o-matic
Please write to me for further information! You will find that im more than willing to get this problem solved :)
Signature · 13 lines
Venlig hilsen/Kind regards Thomas Kirk ARKENA thomas(at)arkena(dot)com Http://www.arkena.com BOFH excuse #212: Of course it doesn't work. We've performed a software upgrade. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
hi,
just like Steve said in the previous mail, prioband is ok but it doesn't make sure that your bandwith is consumed by one service (even if it's in a lower class than interactive stuff) because it doesn't reserve bandwidth for its priomaps.
to achieve what u want i suggest using htb (see previous mail).
Quoted 43 lines
Hep
Trying to get pfifo to work. Setup :
|------|<--->eth1 (192.168.10.0/24) eth0---| GW |<--->eth2 (192.168.11.0/24) |------|<--->eth3 (192.168.12.0/24)read all documentation :
http://lartc.org/howto/lartc.cookbook.interactive-prio.html
here is my TOS mangling rulse in iptables :
$IPTABLES -A PREROUTING -i eth1 -t mangle -s 192.168.10.0/24 -p tcp --dport ftp-data -m state --state NEW,ESTABLISHED -j TOS --set-tos Maximize-Throughput $IPTABLES -A PREROUTING -i eth1 -t mangle -s 192.168.10.0/24 -p tcp --sport 44100:44200 -m state --state NEW,ESTABLISHED -j TOS --set-tos Maximize-Throughput $IPTABLES -A PREROUTING -i eth1 -t mangle -s 192.168.10.0/24 -p tcp --dport ftp -m state --state NEW,ESTABLISHED -j TOS --set-tos Minimize-Delay
Im trying to limited the ftp-data throughoutput by putting all ftp-data in band 2. Ive checked with tcpdump -v -v |grep tos and yes ftp-data get [tos
0x8] which destination is band 2 if i read the documentation right?Allthough everything is set ok all my interactiv traffic ssh/telnet etc is very slow and sloppy when someone uploads to our ftpserver.
Im running kernel 2.4.19 with latest patch-o-matic
Please write to me for further information! You will find that im more than willing to get this problem solved :)
--
Venlig hilsen/Kind regards
Thomas Kirk
ARKENA
thomas(at)arkena(dot)com
Http://www.arkena.com
Quoted 6 lines
BOFH excuse #212:
Of course it doesn't work. We've performed a software upgrade.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Tobias Geiger
hi,
just like Steve said in the previous mail, prioband is ok but it doesn't make sure that your bandwith is consumed by one service (even if it's in a lower class than interactive stuff) because it doesn't reserve bandwidth for its priomaps.
If it dosnt use the TOS fileds to take prioity for delivering packets in a certain way what exactly is pfifo good for?
Quoted 2 lines
to achieve what u want i suggest using htb (see previous mail).
ok i will look into that then.
Signature · 13 lines
Venlig hilsen/Kind regards Thomas Kirk ARKENA thomas(at)arkena(dot)com Http://www.arkena.com BOFH excuse #398: Data for intranet got routed through the extranet and landed on the internet. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/