Skip to contentSkip to conversation

ESFQ

LARTC Vladimír Třebický 3 participants 3 messages Sep 28, 2002 – Oct 22, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I have little problem with ESFQ. I set root qdisc cbq on eth1 (which is on LAN side of network), then 1:1 cbq class with exact bandwidth and its two child - cbq 1:10 and cbq 1:20 with 1:1's bandwidth divided. I also set two ESFQ perturb 10 hash dst on those two classes. But when someone starts to download with 100 threads, he has much more bandwith than someone with only one. I understand that this is exactly what esfq should solve, so I think that somewhere on my side is mistake :-( This is my configuration:

tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit avpkt 1000 cell 8

tc class add dev eth0 parent 1: classid 1:1 cbq bandwidth 10Mbit rate 256 Kbit weight 2.56 Kbit prio 1 allot 1514 cell 8 maxburst 20 avpkt 1000 isolated

tc class add dev eth0 parent 1:1 classid 1:10 cbq bandwidth 10Mbit rate 32 Kbit weight 3.2 Kbit prio 1 allot 1514 cell 8 maxburst 18 avpkt 100 isolated tc class add dev eth0 parent 1:1 classid 1:20 cbq bandwidth 10Mbit rate 224 Kbit weight 2.24 Kbit prio 2 allot 1514 cell 8 maxburst 2 avpkt 1500 bounded

tc qdisc add dev eth0 parent 1:10 handle 10: esfq perturb 10 hash dst tc qdisc add dev eth0 parent 1:20 handle 20: esfq perturb 10 hash dst

iptables -t mangle -A PREROUTING -m length --length 0:500 -j MARK --set-mark 3
iptables -t mangle -A PREROUTING -m length --length ! 0:500 -j MARK --set-mark 4

tc filter add dev eth0 parent 1: protocol ip handle 3 fw flowid 1:10 tc filter add dev eth0 parent 1: protocol ip handle 4 fw flowid 1:20

Thank you very much for answer,

Vladimir Trebicky

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 30 lines · Vladimír Tøebický

Hi,

I have little problem with ESFQ. I set root qdisc cbq on eth1 (which is on LAN side of network), then 1:1 cbq class with exact bandwidth and its two child - cbq 1:10 and cbq 1:20 with 1:1's bandwidth divided. I also set two ESFQ perturb 10 hash dst on those two classes. But when someone starts to download with 100 threads, he has much more bandwith than someone with only one. I understand that this is exactly what esfq should solve, so I think that somewhere on my side is mistake :-( This is my configuration:

tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit avpkt 1000 cell 8

tc class add dev eth0 parent 1: classid 1:1 cbq bandwidth 10Mbit rate 256 Kbit weight 2.56 Kbit prio 1 allot 1514 cell 8 maxburst 20 avpkt 1000 isolated

tc class add dev eth0 parent 1:1 classid 1:10 cbq bandwidth 10Mbit rate 32 Kbit weight 3.2 Kbit prio 1 allot 1514 cell 8 maxburst 18 avpkt 100 isolated tc class add dev eth0 parent 1:1 classid 1:20 cbq bandwidth 10Mbit rate 224 Kbit weight 2.24 Kbit prio 2 allot 1514 cell 8 maxburst 2 avpkt 1500 bounded

tc qdisc add dev eth0 parent 1:10 handle 10: esfq perturb 10 hash dst tc qdisc add dev eth0 parent 1:20 handle 20: esfq perturb 10 hash dst

iptables -t mangle -A PREROUTING -m length --length 0:500 -j MARK --set-mark 3
iptables -t mangle -A PREROUTING -m length --length ! 0:500 -j MARK --set-mark 4

Quoted 4 lines

tc filter add dev eth0 parent 1: protocol ip handle 3 fw flowid 1:10 tc filter add dev eth0 parent 1: protocol ip handle 4 fw flowid 1:20

Thank you very much for answer,

You have to make class 1:1 bounded so it can not get more bandwidth than it's rate.
And remove all isolated parameters. They are not working. In fact, if you add a isolated parameter to class 1:10 and 1:20 then these class will get more bandwidth then the parent allows even if the parent is bounded. I think it's a bug in cbq (more info on
http://www.docum.org/stef.coene/qos/tests/cbq/classes.html).

tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit avpkt 1000 cell 8

tc class add dev eth0 parent 1: classid 1:1 cbq bandwidth 10Mbit rate 256 Kbit weight 2.56 Kbit prio 1 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded

tc class add dev eth0 parent 1:1 classid 1:10 cbq bandwidth 10Mbit rate 32 Kbit weight 3.2 Kbit prio 1 allot 1514 cell 8 maxburst 18 avpkt 100 tc class add dev eth0 parent 1:1 classid 1:20 cbq bandwidth 10Mbit rate 224 Kbit weight 2.24 Kbit prio 2 allot 1514 cell 8 maxburst 2 avpkt 1500

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw

[LARTC] esfq

In reply to Vladimír Třebický

hi,

I want to try esfq in order to make a load balance in my linux router, (both, lan side and interent side)

I want that all hosts of my lan haves the same bandwidth avaible.

Since linux router are connected to an ISP which privide a variable bandwidth, I think that can't use HTB.

Also, in this situation, how can I do to priorize some LAN hosts from others ?

Thanks you very much in advance.

Andres.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/