HTB with dynamic bandwidth
Hi, All,
We want to implement QoS in Linux gateway for different traffic, there are three types of traffic as below;
1. VoIP, total 34k, highest priority
2. HTTP, total 66k, medium priority
3. FTP, total 20k, low priority
However, the bandwidth on the WAN side is dynamic, it could be any where from 34k to 120k. Can we use IPROUTE2 to do it? How to do it, HTB? It there similar work has been down before?
Thanks in advance,
James
Hello,
while you want VoIP which is real-time, I will recommend to use
PRIO with 2 bands. In the 1st band will VoIP, and in second a HTB or CBQ qdisc, which will make bandwidth division for HTTP and FTP.
But the priority/delay is important for VoIP.
Right now, I'm working on a PRIO shaper for VoIP.
Regards,
Thomas
Quoted 8 lines · James Ma
Hi, All,
We want to implement QoS in Linux gateway for different traffic, there are three types of traffic as below;
1. VoIP, total 34k, highest priority
2. HTTP, total 66k, medium priority
3. FTP, total 20k, low priority
Quoted 6 lines
However, the bandwidth on the WAN side is dynamic, it could be any where from 34k to 120k. Can we use IPROUTE2 to do it? How to do it, HTB? It there similar work has been down before?
Thanks in advance,
James
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · James Ma
Hi, All,
We want to implement QoS in Linux gateway for different traffic, there are three types of traffic as below;
1. VoIP, total 34k, highest priority
2. HTTP, total 66k, medium priority
3. FTP, total 20k, low priority
Actuall - 4, if you count the HTML mail :-/
Signature · 10 lines
Cheers, Mattt. icq : 117539757 aboveNetworks www : www.above.nq4u.net [email protected] jabber: [email protected] What's got four legs and an arm? A happy Pit Bull... _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/