Skip to contentSkip to conversation

kernel debugger for RH 7.3

LARTC Daniel Sullivan 3 participants 3 messages Oct 7, 2002 – Oct 8, 2002

lore
Share & tools
lore
#1 lore raw
Quoted 2 lines · Daniel Sullivan

I would like to step through the kernel and modules that perform traffic control.

Depending on what you plan to do, you may find tcsim a more convenient tool than a kernel debugger. tcsim runs most of the traffic control subsystem in user space, so you can just use gdb or any other debugger.

tcsim is part of tcng, http://tcng.sourceforge.net/

- Werner

Signature · 6 lines
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina         [email protected] /
/_http://www.almesberger.net/____________________________________________/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Daniel Sullivan
Quoted 5 lines · Daniel Sullivan

Hi,
Can anyone recommend a kernel debugger for Red Hat 7.3 (kernel 2.4.18)? I would like to step through the kernel and modules that perform traffic control.

Quoted 9 lines

Thanks,
Dan

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

hi, you can use kgdb but you need two hosts, it works fine.

Signature · 8 lines
Vincent EGAL
Email : [email protected]



_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/