htb class!!! attaching
Of course, the example given was my mistake. Anyway, consider these two:
Number 1
# Level 2 - Servers Class
$tc class add dev $dev parent $ROOT_CLASS classid $SERVER_CLASS htb \ rate $SERVER_GARAN ceil $SERVER_MAX $tc filter add dev $dev protocol ip parent $SERVER_CLASS prio $SERVER_PRIO u32 \ match ip dst 192.168.1.0/26 flowid $SERVER_CLASS
# Level 2 - End Servers Class
And number 2:
# Level 2 - Servers Class
$tc class add dev $dev parent $ROOT_CLASS classid $SERVER_CLASS htb \ rate $SERVER_GARAN ceil $SERVER_MAX $tc filter add dev $dev protocol ip parent $ROOT_CLASS prio $SERVER_PRIO u32 \ match ip dst 192.168.1.0/26 flowid $SERVER_CLASS
# Level 2 - End Servers Class
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 14 lines · Nickola Kolev
Of course, the example given was my mistake. Anyway, consider these two:
Number 1
# Level 2 - Servers Class
$tc class add dev $dev parent $ROOT_CLASS classid $SERVER_CLASS htb \
rate $SERVER_GARAN ceil $SERVER_MAX
$tc filter add dev $dev protocol ip parent $SERVER_CLASS prio $SERVER_PRIO
u32 \ match ip dst 192.168.1.0/26 flowid $SERVER_CLASS
# Level 2 - End Servers ClassAnd number 2:
Quoted 6 lines
# Level 2 - Servers Class
$tc class add dev $dev parent $ROOT_CLASS classid $SERVER_CLASS htb \
rate $SERVER_GARAN ceil $SERVER_MAX
$tc filter add dev $dev protocol ip parent $ROOT_CLASS prio $SERVER_PRIO
u32 \ match ip dst 192.168.1.0/26 flowid $SERVER_CLASS
# Level 2 - End Servers Class
You have to add the filter to the class where you want to split the traffic, so number 2.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/