Skip to contentSkip to conversation

IMQ

LARTC Arindam Haldar 10 participants 16 messages Oct 9, 2002 – Jul 27, 2005

lore
Share & tools
lore
#0 lore raw

hi all,
i want to use IMQ with iptables1.2.7a
i have been using it with iptables 1.2.6a & it works well.. i patched it with iptables 1.2.7a & it went well but when i use .runme for patch-o-matic the IMQ option didnt come.
what i have to do to enable IMQ with iptables 1.2.7a for linux kernel 2.4.19 ?
awaiting a reply
A.H

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 2 lines · Arindam Haldar

what i have to do to enable IMQ with iptables 1.2.7a for linux kernel 2.4.19 ?

launch ./runme extra

tw

Signature · 8 lines
----------------
 ck.eter.tym.pl

"Never let shooling disturb Your education"

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Arindam Haldar
Quoted 6 lines · Tomasz Wrona
Quoted 2 lines · Arindam Haldar

what i have to do to enable IMQ with iptables 1.2.7a for linux kernel 2.4.19 ?

launch ./runme extra

i did that !
i first patched IMQ going into iptables1.2.7a directory & then changing to patch-o-matic directory did--> ./runme extra
but the IMQ option didnt come !!
did i miss any step ??

Quoted 2 lines

tw

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Arindam Haldar

Hello Arindam,
I recommend you wait release from Patrick
But if you wish try this.
NOT OFFICAL !!!!
AT THIS TIME WORK !! ONLY !!! FOR ME.

Brief instruction:

cd iptables-1.2.7a
patch -p1 < ../iptables-1.2.7a-imq.diff
chmod a+x extensions/.IMQ-test
chmod a+x extensions/.IMQ-test6

cd linux-2.4.19
patch -p1 < ../imq-2.4.19.diff

cd patch-o-matic-YYYYMMDD
patch -p1 < ../pom-imq.diff
./runme extra

Recompile kernel and iptables.

-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------

#4 lore raw
In reply to Arindam Haldar

thanx so much ... :)
ys i will wait for release from Patric, but will try ur suggestion

Quoted 20 lines · Alexey Talikov

Hello Arindam,
I recommend you wait release from Patrick
But if you wish try this.
NOT OFFICAL !!!!
AT THIS TIME WORK !! ONLY !!! FOR ME.

Brief instruction:

cd iptables-1.2.7a
patch -p1 < ../iptables-1.2.7a-imq.diff
chmod a+x extensions/.IMQ-test
chmod a+x extensions/.IMQ-test6

cd linux-2.4.19
patch -p1 < ../imq-2.4.19.diff

cd patch-o-matic-YYYYMMDD
patch -p1 < ../pom-imq.diff
./runme extra

Quoted 8 lines

Recompile kernel and iptables.

-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#6 lore raw
In reply to Arindam Haldar
Quoted 4 lines · Rimas

Hi folks,

I would like to use the IMQ device and what I have to apply (patches) for the kernel 2.4.19 and iptables 1.2.7a?

See the IMQ pages :
http://trash.net/~kaber/imq

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#7 lore raw
In reply to Arindam Haldar

Has anybody got imq running on iptables 1.2.7a. The home page for imq only seems to have a patch for 1.2.6a.

Signature · 5 lines
Aaron Clausen

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#8 lore raw
In reply to Arindam Haldar
Quoted 2 lines · On Mon, 2 Dec 2002 09:30:04 -0800 (PST) Aaron Clausen…

Has anybody got imq running on iptables 1.2.7a. The home page for imq only seems to have a patch for 1.2.6a.

I'm successfully run iptables 1.2.7a with patch from IMQ homepage. The thing what I only does to get it work, replace strings contais NETFILTER_VERSION to "1.2.7a" in libipt_IMQ.c and libip6t_IMQ.c .

Quoted 7 lines
Signature · 6 lines
-- 
Aaron Clausen

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 7 lines
Sheshka Aleksey
Senior Security Administrator

PGP key : http://pgp.dtype.org:11371/pks/lookup?op=get&search=0x0BE90515
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#9 lore raw
In reply to Arindam Haldar

Hello

I have a server with a dsl connection on eth1 and local interface eth0. Because of the NAT i cannot direct traffic to IMQ device in PREROUTING chain but have to use INPUT and FORWARD. So i use rules.

iptables -t mangle -A INPUT -i eth1 -j IMQ --todev 0 iptables -t mangle -A FORWARD -i eth1 -j IMQ --todev 0

And now the strange thing: FORWARD traffic gets directed nicely to the IMQ, but INPUT *doesn't* !

To be just sure i removed "FORWARD" line and left only the "INPUT" (other mangle rules were removed)

Chain INPUT (policy ACCEPT 3511 packets, 2753307 bytes)
pkts bytes target prot opt in out source
destination
343 439847 IMQ all -- eth1 any anywhere
anywhere IMQ: todev 0

But when i check IMQ0 using ifconfig:

imq0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:30
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

i see there is no traffic going through this device!

Anyone knows how can it be possible ?

--
best regards,
Marcin 'Yans' Bazarnik
[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#10 lore raw
In reply to Arindam Haldar

sorry last patch was broken, this one is ok.
patrick

Quoted 80 lines · Patrick McHardy

Hi Daniel,

Quoted 42 lines · Daniel Sercaianu

I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.

It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.

What rules should be added to make this possible?

My iptables rules are:

iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4

iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 up

ip rule shows the following output:

32764:  from zzz.zzz.zzz.0/24 lookup ew
32765:  from all fwmark        1 lookup ew
32766:  from all lookup main
32767:  from all lookup default

My tc + htb rule look like this:

/sbin/tc qdisc add dev imq0 root handle 1: htb default 200 r2q 3 /sbin/tc class add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 handle 1:
u32 divisor 256

Quoted 6 lines

/sbin/tc class add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5
/sbin/tc qdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10
/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2

If i understood you right this is probably not working because imq sees packets before zzz.zzz.zzz.zzz is dnated back to xxx.xxx.xxx.xxx. please try the attached patch.

bye

patrick

------------------------------------------------------------------------

imq.cSun Aug 11 15:31:17 2002 renamed from imq.c.origSun Aug 11 15:30:24 2002 +1 -1
@@ -37,7 +37,7 @@
 imq_nf_hook,
 PF_INET,
 NF_IP_PRE_ROUTING,
-NF_IP_PRI_MANGLE + 1
+NF_IP_PRI_NAT_DST + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv4 = {

imq.cSun Aug 11 15:31:17 2002 line 60

Quoted 8 lines
imq.cSun Aug 11 15:31:17 2002 renamed from imq.c.origSun Aug 11 15:30:24 2002 +1 -1
@@ -54,7 +54,7 @@
 imq_nf_hook,
 PF_INET6,
 NF_IP6_PRE_ROUTING,
-NF_IP6_PRI_MANGLE + 1
+NF_IP6_PRI_NAT_SRC + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv6 = {
imq.cSun Aug 11 15:31:17 2002 renamed from imq.c.origSun Aug 11 15:30:24 2002 +2 -2
@@ -37,7 +37,7 @@
  imq_nf_hook,
  PF_INET,
  NF_IP_PRE_ROUTING,
-NF_IP_PRI_MANGLE + 1
+NF_IP_PRI_NAT_DST + 1
  };
 
  static struct nf_hook_ops imq_egress_ipv4 = {
@@ -54,7 +54,7 @@
  imq_nf_hook,
  PF_INET6,
  NF_IP6_PRE_ROUTING,
-NF_IP6_PRI_MANGLE + 1
+NF_IP6_PRI_NAT_DST + 1
  };
 
  static struct nf_hook_ops imq_egress_ipv6 = {
#11 lore raw
In reply to Arindam Haldar

ive got such network:

|--------|   |-------------|
| WORLD  |---|ROUTER/server| ------ NATED LAN
|--------|   |-------------|

I want to use imq on ROUTER, what behaviour to choose ? AA, BA, AB, BB ??

Signature · 4 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#12 lore raw
In reply to Arindam Haldar
Quoted 5 lines
Quoted 2 lines · Dariusz Dwornikowski

I want to use imq on ROUTER, what behaviour to choose ? AA, BA, AB, BB ??

Quoted 8 lines

That depends on what you want to do. For example:

*) BA - If you want to have all packets on the IMQ after the nat table - so
you wouldn't see any internal ips anymore on the IMQ device. *) BB - If you want to have packets with internal ips on the IMQ before the
pass the nat table. But you can't match on your external IP with BB.

yes but i want to have two IMQ devices... for outside eth and inside eth

Signature · 4 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#13 lore raw
In reply to Arindam Haldar
Quoted 8 lines
Quoted 2 lines

yes but i want to have two IMQ devices... for outside eth and inside eth

Ahmm.. don't know what you mean with that. But if you have a external Interface (ex eth0) on which you want to shape egress and also ingress shaping
you simply do:

Quoted 7 lines

ip link set imq0 up
ip link set imq1 up

${IPTABLES} -t mangle -I PREROUTING -i ${EXT_DEV} -j IMQ --todev 0 ${IPTABLES} -t mangle -I POSTROUTING -o ${EXT_DEV} -j IMQ --todev 1

and put your QoS on imq0 and imq1...

i want to shape traffic for my clients and do not know what behaviour to choose...
in your example will it be possible to match NATed addresses of my clients ?

Signature · 4 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#14 lore raw
In reply to Arindam Haldar
Quoted 10 lines
Quoted 5 lines

i want to shape traffic for my clients and do not know what behaviour to choose...
in your example will it be possible to match NATed addresses of my clients ?

you want to match the translated addresses of your clients (-> external IP) -
then BA is the correct behaviour.

no i want match their private addresses.
i want imq0 for ext_if and imq1 for internal_if..

so i can traffic shaping on matched NATed ips

Signature · 4 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#15 lore raw
In reply to Arindam Haldar
Quoted 4 lines
Quoted 4 lines

no i want match their private addresses.
i want imq0 for ext_if and imq1 for internal_if..

Quoted 10 lines
Quoted 1 line

so i can traffic shaping on matched NATed ips

Oh ok. I was irritated because you say NATed ips - for me this are all clients
after the passed the nat table...

So you ned BB. IMQ hook before the postrouting table (where your NAT will happen) and you have internal addresses on the imq device.

thank you very much.

Signature · 4 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc