Skip to contentSkip to conversation

outgoing packets notworking..

LARTC 박 정은 1 participant 1 message Oct 11, 2002

lore
Share & tools
lore

박 정은

author
#0 lore raw

hi all

I just tried to test whether the HTB works well or not .. (policy is very simple ^^;;)

I tried HTB simulator 'Ethloop' with lo (loopback ) and I found HTB works well....(very well)

So I changed lo to eth0 and tested ..

./tc qdisc add dev eth0 root handle 1: htb default 10
./tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbps ceil 500kbps ./tc class add dev eth0 parent 1:1 classid 1:2 htb rate 180kbps ceil 500kbps
./tc class add dev eth0 parent 1:2 classid 1:10 htb rate 150kbps ceil 500kbps prio 2
./tc class add dev eth0 parent 1:2 classid 1:11 htb rate 5kbps ceil 10kbps prio 2
./tc class add dev eth0 parent 1:1 classid 1:12 htb rate 10kbps ceil 20kbps prio 1
./tc qdisc add dev eth0 parent 1:10 handle 20: pfifo limit 5 ./tc qdisc add dev eth0 parent 1:11 handle 30: pfifo limit 5 ./tc qdisc add dev eth0 parent 1:12 handle 40: sfq perturb 10

./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 23 0xffff flowid 1:11
./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 80 0xffff flowid 1:12

It works well with outgoing packets ..

BUT!!

I changed last two lines to control Incoming packets .. like below..
./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 23 0xfffe flowid 1:11
./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 80 0xfffe flowid 1:12

It never works .. !! If I send to 23 port 50kbps It receive 50kbps.. I
have no idea ..

Did I thought wrong?

thanks in advance...

_________________________________________________________________
MSN 포토에서 여러분의 사진을 간편하게 관리하세요. 다른 사람들과 공유는 물론
인화도 할 수 있습니다. http://photos.msn.co.kr

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/