Skip to contentSkip to conversation

img+htb -> kernel oops :(

LARTC Razvan Cosma 3 participants 4 messages Oct 11, 2002 – Oct 12, 2002

lore
Share & tools
lore
#0 lore raw

Hello,
I have been experimenting with htb+imq, and while adding/removing
rules got a kernel oops (machine frozen, only sysrq worked).

Last entries in the kernel log:

Oct 11 13:25:50 mach2 kernel: HTB init, kernel part version 3.6
Oct 11 13:25:50 mach2 kernel: htb*g j1462262
Oct 11 13:25:50 mach2 kernel: htb*r7 m=0
Oct 11 13:25:50 mach2 kernel: htb*r6 m=0
Oct 11 13:25:50 mach2 kernel: htb*r5 m=0
Oct 11 13:25:50 mach2 kernel: htb*r4 m=0
Oct 11 13:25:50 mach2 kernel: htb*r3 m=0
Oct 11 13:25:50 mach2 kernel: htb*r2 m=0
Oct 11 13:25:50 mach2 kernel: htb*r1 m=0
Oct 11 13:25:50 mach2 kernel: htb*r0 m=0
Oct 11 13:26:03 mach2 kernel: HTB: quantum of class 10001 is small. Consider r2q change.

<4>HTB: quantum of class 10010 is small. Consider r2q change. <4>HTB: quantum of class 10020 is small. Consider r2q change. <4>HTB: quantum of class 10100 is small. Consider r2q change. <4>HTB: quantum of class 10200 is small. Consider r2q change. <7>retrans_out leaked.

Oct 11 13:26:03 mach2 kernel: retrans_out leaked.
Oct 11 13:26:03 mach2 kernel: retrans_out leaked.
Oct 11 13:31:05 mach2 kernel: retrans_out leaked.

Any hints on what could have caused the machine to hang?
Thank you very much.

PS. kernel 2.4.18 + imq-2.4.18.diff-10.1 + htb3.6_2.4.17, on a slackware 8.0 system.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 2 lines · Razvan Cosma

I have been experimenting with htb+imq, and while adding/removing
rules got a kernel oops (machine frozen, only sysrq worked).

I cant help You but I have also problems, system hangs after some time of work [day or two]. I am not sure if its IMQ but I suppose it's. Probably be sure after more tests. [system hangs without an oops and sysrq doesn't work]

Regards
tw

Signature · 8 lines
----------------
 ck.eter.tym.pl

"Never let shooling disturb Your education"

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Razvan Cosma
Quoted 5 lines · Tomasz Wrona
Quoted 2 lines · Razvan Cosma

I have been experimenting with htb+imq, and while adding/removing
rules got a kernel oops (machine frozen, only sysrq worked).

Quoted 8 lines

I cant help You but I have also problems, system hangs after some time of work [day or two]. I am not sure if its IMQ but I suppose it's. Probably be sure after more tests. [system hangs without an oops and sysrq doesn't work]

Regards
tw

Found the problem (or at least I think so) - the PREROUTING and POSTROUTING rules need to be attached to different imq devices. Thank you Ciprian Niculescu.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Razvan Cosma
Quoted 14 lines · Razvan Cosma
Quoted 11 lines · Tomasz Wrona
Quoted 2 lines · Razvan Cosma

I have been experimenting with htb+imq, and while adding/removing rules got a kernel oops (machine frozen, only sysrq worked).

I cant help You but I have also problems, system hangs after some time of work [day or two]. I am not sure if its IMQ but I suppose it's. Probably be sure after more tests. [system hangs without an oops and sysrq doesn't work]

Quoted 8 lines
Quoted 3 lines

Regards
tw

Found the problem (or at least I think so) - the PREROUTING and POSTROUTING rules need to be attached to different imq devices. Thank you Ciprian Niculescu.

you're welcome, but i don't remember helping you

C

P.S. esti si pe rlug parca?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/