congestion problem
I have the folowing configuration:
Client --- R1 --- R2 --- R3 --- Web
the Client it's me, the R1 router it's myne (so i can control it), the R2 is my provider router, and R3 is the provider,provider router.
R2 - R3 is a 2mbit link
R1 - R2 is a 10mbit link
R2 have multiple interfaces and other 10mbit links
I have a 32kbit garanted bandwidth on the R2-R3, but without limit (rate 32kbit, ceil 2mbit)
The congested link is between R2 and R3. I start to download something, the R2-R3 32kbit gets full, borrows and gets to around (let's say) 50kbit. Then other clients comes, and the bandwitdth above 32kbit gets unsecured. In this moment i want to browse a web page, and it comes very very hard.
The question is: what can i do from R1 to make the browsing faster, but not limiting the download to 20kbit (for ex)???
C
-------------------------------------------------------
Xnet scaneaza automat toate mesajele impotriva virusilor folosind RAV AntiVirus. Xnet automatically scans all messages for viruses using RAV AntiVirus.
Nota: RAV AntiVirus poate sa nu detecteze toti virusii noi sau toate variantele lor. Va rugam sa luati in considerare ca exista un risc de fiecare data cand deschideti fisiere atasate si ca MobiFon nu este responsabila pentru nici un prejudiciu cauzat de virusi.
Disclaimer: RAV AntiVirus may not be able to detect all new viruses and variants. Please be aware that there is a risk involved whenever opening e-mail attachments to your computer and that MobiFon is not responsible for any damages caused by viruses.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Client --- R1 --- R2 --- R3 --- Web
the Client it's me, the R1 router it's myne (so i can control it), the R2 is my provider router, and R3 is the provider,provider router.
R2 - R3 is a 2mbit link
R1 - R2 is a 10mbit link
R2 have multiple interfaces and other 10mbit links
I have a 32kbit garanted bandwidth on the R2-R3, but without limit (rate 32kbit, ceil 2mbit)
You have guaranteed 32K upstream, downstream or both?
There's something strange about that in any case.
For upstream, how does r2 know which packets are from you? Source address? Then some other customer of your ISP could deny you service by spoofing your address (unless your ISP filters that). Downstream is also strange, first cause your ISP's ISP would then have to know about you, second cause you have little control over what others send you. So if that is controlled at all it should be shaped in accordance with your wishes.
You talk about downloading. But in that case the bandwidth is used mostly downstream. You have limited control over that. Assuming the servers are using tcp you could control the acks (more to the point the windows) you send back to limit the rate at which they send to you.
Of course, 32Kbit is slow enough that you're never likely to be happy with download speed.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/