owner based policy routing
hi all,
THE SCENARIO:
we are connected to 2 isp, both having their large network.. isp A has gateway with ofc network while ispB has satellite gateway & hence there are advantages to take specific routes thru specific isp.
PRESENT IMPLEMENTATION:
the present linux box with kernel-2.4.19, julains multiroute patch, iproute-ss020116, htb3.6-020525 & iptables-1.2.7a... this box has 5 ether ports & presently doing only **source** based policy routing for access to internet...at present no squid is implemented in this box... things are working good for last 40-45 days !
THE RULES DEFINED:
10:
from all lookup main
50: from <ipNetispA> lookup ispA 50: from all fwmark 50 lookup ispA 75: from <ipNetispB> lookup ispB 75: from all fwmark 75 lookup GNFC 100: from <localNetA> lookup balance 100: from <localNetB> lookup balance 100: from <localNetC> lookup balance 100: from all fwmark 100 lookup balance 32766: from all lookup main 32767: from all lookup default
THE ROUTES:
[root@ICG surfNet]# ip route ls ta ispA
default via <gatewayISP-A> dev eth3 proto static src <eth3ISP-A> prohibit default proto static metric 1
[root@ICG surfNet]# ip route ls ta ispB
default via <gatewayISP-B> dev eth0 proto static src <eth0ISP-B> prohibit default proto static metric 1
[root@ICG surfNet]# ip route ls ta balance
default proto static
nexthop via <gatewayISP-A> dev eth3 weight 3 nexthop via <gatewayISP-B> dev eth0 weight 1
prohibit default proto static metric 1
[root@ICG surfNet]# ip route ls ta default
default via <gatewayISP-B> dev eth0
THE GOAL:
we want policy routing based on owner of the packet, in perticular we want to handle squid to take the best path--best path according to us(pls no BGP here).
WHAT WE TRIED:
we tried using iptables owner based rules & marked packets( as one can see in rules above), but it didnt help.
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 202.0.0.0/8
-j MARK --set-mark 50
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 204.0.0.0/7
-j MARK --set-mark 50
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 203.0.0.0/8 -j MARK --set-mark 75
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 216.0.0.0/8 -j MARK --set-mark 75
but packets were not marked as seen by >> iptables -nvL -t mangle & hence owner based pilicy routing not working
... hence now we turn to the list for help..
awaiting a reply ...
thanx to you all in advance...
A.H
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Arindam Haldar
THE SCENARIO:
we are connected to 2 isp, both having their large network.. isp A has gateway with ofc network while ispB has satellite gateway & hence there are advantages to take specific routes thru specific isp.
I suppose this box has three network connections, one to the internal network, and one for each Internet connection. So, for the traffic coming from the internal network, this box is a router.
Quoted 3 lines
THE RULES DEFINED:
10: from all lookup main
"ip rule" are checked from lower to higher numbers, so once visited "table local" (prio 0) all your traffic (from all) visits "table main". I suppose "table main" doesn't have a default route of some sort, because that would stop packet routing at that point, turning the rest of "ip rule" useless.
Quoted 8 lines
WHAT WE TRIED:
we tried using iptables owner based rules & marked packets( as one can see in rules above), but it didnt help.
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 202.0.0.0/8
-j MARK --set-mark 50
but packets were not marked as seen by >> iptables -nvL -t mangle & hence owner based pilicy routing not working
If "iptable -t mangle -L -vn" shows no matches, it can be for two
reasons: either destination address doesn't match, or uid-owner doesn't match. I have never used "--match owner" myself, but a quick try here seems to work, at least for a simple network application.
Maybe squid runs as user "squid" (or whatever), but netfilter sees them as originating from another user, maybe root, maybe no user at all.
Signature · 5 lines
Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Woody (Linux 2.4.18-586tsc) _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
Quoted 1 line · Arindam Haldar
50: from all fwmark 50 lookup ispA
fwmark in ip rule is 0x50 (it is defined and printed in hex)
Quoted 2 lines
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 202.0.0.0/8
-j MARK --set-mark 50
and here 50 is 0x32 (not 0x50). Is that the problem?
Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
ok, i have tried applying the ip rule fwmark in hex but dont see any difference !..
The routing decission is take be4 the packets comes to OUTPUT table, if thats true then it will be not possible to route **owner** as per policy routing--am i right ??
if ys then how can one achieve **owner** based policy routing in linux box ??
Quoted 15 lines · Julian Anastasov
Hello,
Quoted 1 line · Arindam Haldar
50: from all fwmark 50 lookup ispA
fwmark in ip rule is 0x50 (it is defined and printed in hex)Quoted 2 lines
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 202.0.0.0/8
-j MARK --set-mark 50
Quoted 9 lines
and here 50 is 0x32 (not 0x50). Is that the problem?Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
Quoted 11 lines
WHAT WE TRIED:
we tried using iptables owner based rules & marked packets( as one can see in rules above), but it didnt help.
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 202.0.0.0/8
-j MARK --set-mark 50
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 204.0.0.0/7
-j MARK --set-mark 50
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 203.0.0.0/8 -j MARK --set-mark 75
iptables -I OUTPUT -t mangle -m owner --uid-owner <squid> -d 216.0.0.0/8 -j MARK --set-mark 75
Yes, I addressed once in the past this list with the very same problem. Owner based policy routing seems not to be possible.
- Thilo Schulz
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
Quoted 2 lines · Arindam Haldar
ok, i have tried applying the ip rule fwmark in hex but dont see any difference !..
It is already in hex, use something like:
ip rule ... fwmark 50
iptables ... --set-mark 0x50
Quoted 1 line
The routing decission is take be4 the packets comes to OUTPUT table, if
Right
Quoted 2 lines
thats true then it will be not possible to route **owner** as per policy routing--am i right ??
The sockets select route and when localout selects different
ISP may be the source should be changed too.
Quoted 2 lines
if ys then how can one achieve **owner** based policy routing in linux box ??
This is something that others should comment. NF is
supposed to do everything :)
Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/