Skip to contentSkip to conversation

trying to use wondershaper on a dedicated line (not adsl)

LARTC [email protected] 2 participants 2 messages Oct 14, 2002 – Oct 15, 2002

lore
Share & tools
lore
#0 lore raw

Hi there,

I'm quite new to trafic shaping and even with the HOWTO, I'm still a bit confused ...

I have a small network, with a connection to the internet on a dedicated line (128 kbits). My firewall/Masq is a linux 2.19 and I want to be able to shape my trafic. All I want to do is exactly done with wondershaper. I tried it and unfortunately, the result was not what I've expected. In fact, I couldn't see any change in the ping response time when I use my link to download.
I've changed the speed in the top of the script, it effectively reduce the download speed, but no luck with response time ...

Does I have to change anything on the script to adapt it (I'm not using an adsl line, maybe this is the problem) ?

I really don't know where to start to troubleshoot this connection ...

Thanks,

Pascal.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 5 lines · On Monday 14 October 2002 22:13, [email protected] wrote:

Hi there,

I'm quite new to trafic shaping and even with the HOWTO, I'm still a bit confused ...

Quoted 8 lines

I have a small network, with a connection to the internet on a dedicated line (128 kbits). My firewall/Masq is a linux 2.19 and I want to be able to shape my trafic. All I want to do is exactly done with wondershaper. I tried it and unfortunately, the result was not what I've expected. In fact, I couldn't see any change in the ping response time when I use my link to download.
I've changed the speed in the top of the script, it effectively reduce the download speed, but no luck with response time ...

The reduce in download speed means that you have everything you need and the script is working. But the ping should also go down. Can you send me/post the output of tc -s -d class show dev eth0 ??

Quoted 2 lines

Does I have to change anything on the script to adapt it (I'm not using an adsl line, maybe this is the problem) ?

It's even better to have a dedicated line so you have a stable bandwidth.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/