Skip to contentSkip to conversation

exceeding child bandwith only in special cases ?

LARTC raptor 2 participants 2 messages Oct 16, 2002

lore
Share & tools
lore

raptor

author
#0 lore raw

I was rereading tcng docs... and think i found a possible solution to a scenario i want to implement...i.e.

I want to create channel with rate 64kb/s but be able to jump to 128kb/s if the traffic is destinated to the proxy server... (all other traffic must not exceed 64kb/s)... pseudo-code :

{...

	if src = 192.168.0.1  {  
	  if dst = 192.168.0.15 and class1 has-no-bandwith-available 
		{  class1(rate 64kbps)   }
         else{ class2(rate 64kbps)  }
      } else class1(rate 64kbps)

...
}

i.e only when class1 bandwith is exausted and the traffic is destinated to proxy give another 64kb/s. (if not exhausted use it, if exausted but not destinated to proxy then sorry) I know that it can possibly be achieved with the Metering primitives, but can figure it out yet.. could u help me..

One other question in this case should classes be parent and child i.e.:

class2(rate 128) {
class1(rate 64)
}

or siblings :

class1(rate 64) {}
class2(rate 64) {}

which seems more apropriate for the case...

Thanx alot

raptor
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 3 lines · raptor

i.e only when class1 bandwith is exausted and the traffic is destinated to proxy give another 64kb/s. (if not exhausted use it, if exausted but not destinated to proxy then sorry)

First of all, this has not all that much to do with classes, because metering receives no feedback from queuing. But you can of course try to build a system without feedback.

Quoted 2 lines

I know that it can possibly be achieved with the Metering primitives, but can figure it out yet.. could u help me..

For tcc, that's pretty straightforward, e.g. something like this:

$low = bucket(rate 64kbps,burst 30kB);
$high = bucket(rate 128kbps,burst 30kB);

$cond = ip_src = 192.168.0.1;
$is_proxy = ip_dst = 192.168.0.15;

egress {
    class (<$good>)
        if $cond && $is_proxy && 
          conform $high && count $low && count $high;
    class (<$bad>)
        if $cond && $is_proxy;

    class (<$good>)
        if $cond &&
          conform $low && count $low && count $high;
    class (<$bad>)
        if $cond;

    class (<$bad>) if 1;

    prio {
        $good = class;
        $bad = class;
    }
}

(For real-life use, you'd probably want to put these meters in macros, like trTCM and friends.)

Now, this is a metering configuration tcc doesn't understand yet, so you need to add the following rules to if_u32.c:map:

    /* raptor's VIP band */
    { "n0t0t1c2c3",             "p0uc3 p1uc2 c2" },
    { "n0t1t0c2c3",             "p0uc3 p1uc2 c2" },
    { "n0t0t1c2d",              "p0ud p1uc2 c2" },
    { "n0t1t0c2d",              "p0ud p1uc2 c2" },

(You need the last two if you want to drop instead of using a "bad" class. And, BTW, why "... p1c2c2" instead of "... p1uc2 c2" wouldn't work is left as an exercise to the reader :-)

All this is, of course, completely untested.

Quoted 1 line

One other question in this case should classes be parent and child i.e.:

There's only one class for both types of traffic :-)

- Werner

Signature · 6 lines
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina         [email protected] /
/_http://www.almesberger.net/____________________________________________/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/