Problems patching kernel 2.4.19-r9
A question about the tc binary and diff file that are included in htb3.6-020525.tgz. I can't seem to patch tc in the source tree, and that has made me hesitate to alternatively substitute the native /usr/sbin/tc for the binary supplied with the patch materials. I'm running kernel 2.4.19-r9, and when I run
xingu:/usr/src/linux #patch -p1 --dry-run < ../htb3.6.tc.diff
the result is:
patching file tc/q_htb.c
can't find file to patch at input line 312 Perhaps you used the wrong -p or --strip option? The text leading up to this was:
------------------
|--- iproute2/tc/Makefile Tue Jul 6 1999 |+++ iproute2new/tc/Makefile Thu May 9 2002
------------------
File to patch:
Does anyone know what's going on here and how I can proceed safely?
Thanks for any advice.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 18 lines · On Sunday 20 October 2002 04:16, [email protected] wrote:
A question about the tc binary and diff file that are included in htb3.6-020525.tgz. I can't seem to patch tc in the source tree, and that has made me hesitate to alternatively substitute the native
/usr/sbin/tcfor the binary supplied with the patch materials. I'm running kernel 2.4.19-r9, and when I runxingu:/usr/src/linux #patch -p1 --dry-run <
../htb3.6.tc.diffthe result is:
patching file
tc/q_htb.c
can't find file to patch at input line 312 Perhaps you used the wrong -p or --strip option? The text leading up to this was:
------------------
Quoted 8 lines
|--- iproute2/tc/Makefile Tue Jul 6 1999 |+++ iproute2new/tc/Makefile Thu May 9 2002------------------
File to patch:Does anyone know what's going on here and how I can proceed safely?
You want to patch iproute2. So download the iproute2 source and patch it :) You are trying to patch the kernel source.
iproute2 source :
ftp://ftp.inr.ac.ru/ip-routing/
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
So download the iproute2 source and patch it :)
:( Background explanation: The HTB on-line manual says
simply: "Also you will have to use patched tc tool." To my newbie eye, this is vague and incomplete, hence my query.
Answer: In fact, I have iproute-20010824-r1 in the sources. No matter, the output is the same:
Upon trying again to "dry-run" patch from within /usr/src/linux and responding either "iproute2" or "iproute" to the returned query "File to patch:", both tests return "No such file or directory".
Please allow me one further question: As I do not wish to design complicated traffic-shaping rules for now, could I simply use the earlier version of HTB (HTB2 ?) which is already in the 2.4.19-9 kernel I have installed? I understand that the commands may be different. If using this earlier version is feasible, please point me to the command reference.
I have learned much in a very short time from reading the recent postings of Stef Coene and others on the LARTC. Thank you to you and everyone participating on the list.
J. B. Schatz
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · [email protected] wrote:
could I simply use the earlier version of HTB (HTB2 ?) which is already in the 2.4.19-9 kernel I have installed?
I don't know about 2.4.19-9, but if you use 2.4.20-pre6 or newer, the procedure is as follows:
$ wget http://luxik.cdi.cz/~devik/qos/htb/v3/htb3.6-020525.tgz $ tar xfz iproute2-2.4.7-now-ss010824.tar.gz $ mkdir htb $ tar xCfz htb htb3.6-020525.tgz $ patch -s -p1 -d iproute2 <htb/htb3.6_tc.diff
- Werner
Signature · 6 lines
_________________________________________________________________________ / Werner Almesberger, Buenos Aires, Argentina [email protected] / /_http://www.almesberger.net/____________________________________________/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines
:( Background explanation: The HTB on-line manual says
simply: "Also you will have to use patched tc tool." To my newbie eye, this is vague and incomplete, hence my query.
-- SNIP --
Quoted 4 lines
I have learned much in a very short time from reading the recent postings of Stef Coene and others on the LARTC. Thank you to you and everyone participating on the list.
J.B. - I 100% agree with you! :)
I would again like to point out to everyone what a fantastic resource this is!!!
I know the work you do goes without thanks most of the time.
I have been trying to follow this forum every day for about the last 3 months.
I still don't know enough about the subject to be of much use to anyone but I'm learning.
Never give up! :)
Cheers DiG
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/