Skip to contentSkip to conversation

help, a children can not borrow from a parent?

LARTC [email protected] 2 participants 2 messages Oct 21, 2002

lore
Share & tools
lore
#0 lore raw

WHEN i send packets from 10.1.1.1 at rate frome 12mbit to 50mbit BY using SMATRBIT 600,
the rate of class 10:100 is always 12bits.

Quoted 10 lines
Quoted 10 lines

Hi ;

MY script:

tc-htb3 qdisc del dev eth2 root
ipchains -F

tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40

tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit

burst

Quoted 3 lines
Quoted 3 lines

2000

tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit

ceil

Quoted 2 lines
Quoted 2 lines

50mbit prio 1
tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit

ceil

Quoted 6 lines
Quoted 6 lines

50Mbit prio 8

ipchains -A fw -s 10.1.1.1 -m 100
ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT

tc-htb3 filter add dev eth2 protocol ip parent 10:0 prio 1 handle 100

fw

Quoted 7 lines
Quoted 7 lines

classid 10:100

WHEN i send packets at 20mbit from 10.1.1.1 ,
#tc -s -d qdisc show dev eth2
qdisc htb 10:
Sent 246602122 bytes 487287 pkts (dropped 323938, overlimits 1850710)

Quoted 7 lines
Quoted 7 lines

#tc -s -d class show dev eth2
class htb 10:1 root prio 0 rate 50Mbit ceil 50Mbit burst 1985b/8 mpu 0b cburst 67121b/8 mpu 0b quantum 0 level 7
Sent 246602122 bytes 487287 pkts (dropped 0, overlimits 0) rate 8bps

class htb 10:100 parent 10:1 prio 1 rate 12Mbit ceil 50Mbit burst

17325b/8

Quoted 4 lines
Quoted 4 lines

mpu 0b cburst 67121b/8 mpu 0b quantum 39321 level 0
Sent 246552164 bytes 486503 pkts (dropped 323938, overlimits 0)

class htb 10:20 parent 10:1 prio 1 rate 38Mbit ceil 50Mbit burst

51396b/8

Quoted 9 lines
Quoted 6 lines

mpu 0b cburst 67121b/8 mpu 0b quantum 124518 level 0
Sent 49958 bytes 784 pkts (dropped 0, overlimits 0) rate 8bps

a class 10:100 can not borrow from a parent 10:0 ,WHY?

How do you come to that conclustion ?????

Stef

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 3 lines · On Monday 21 October 2002 16:24, [email protected] wrote:

WHEN i send packets from 10.1.1.1 at rate frome 12mbit to 50mbit BY using SMATRBIT 600,
the rate of class 10:100 is always 12bits.

I suppose it's the SMATRBIT 600 that says it sends 12bits.

WHAT if you change 12mbit to 15mbit. WHAT if you send more then 20Mbit. WHAT if you change 12mbit to a lower value (1mbit).
CAN you can do that and post the results?
I don't think there is an error in your setup.

Stef

Quoted 72 lines
Quoted 11 lines
Quoted 11 lines

Hi ;

MY script:

tc-htb3 qdisc del dev eth2 root
ipchains -F

tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40

tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit

burst

Quoted 3 lines
Quoted 3 lines

2000

tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit

ceil

Quoted 2 lines
Quoted 2 lines

50mbit prio 1
tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit

ceil

Quoted 6 lines
Quoted 6 lines

50Mbit prio 8

ipchains -A fw -s 10.1.1.1 -m 100
ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT

tc-htb3 filter add dev eth2 protocol ip parent 10:0 prio 1 handle 100

fw

Quoted 7 lines
Quoted 7 lines

classid 10:100

WHEN i send packets at 20mbit from 10.1.1.1 ,
#tc -s -d qdisc show dev eth2
qdisc htb 10:
Sent 246602122 bytes 487287 pkts (dropped 323938, overlimits 1850710)

Quoted 7 lines
Quoted 7 lines

#tc -s -d class show dev eth2
class htb 10:1 root prio 0 rate 50Mbit ceil 50Mbit burst 1985b/8 mpu 0b cburst 67121b/8 mpu 0b quantum 0 level 7
Sent 246602122 bytes 487287 pkts (dropped 0, overlimits 0) rate 8bps

class htb 10:100 parent 10:1 prio 1 rate 12Mbit ceil 50Mbit burst

17325b/8

Quoted 4 lines
Quoted 4 lines

mpu 0b cburst 67121b/8 mpu 0b quantum 39321 level 0
Sent 246552164 bytes 486503 pkts (dropped 323938, overlimits 0)

class htb 10:20 parent 10:1 prio 1 rate 38Mbit ceil 50Mbit burst

51396b/8

Quoted 10 lines
Quoted 6 lines

mpu 0b cburst 67121b/8 mpu 0b quantum 124518 level 0
Sent 49958 bytes 784 pkts (dropped 0, overlimits 0) rate 8bps

a class 10:100 can not borrow from a parent 10:0 ,WHY?

How do you come to that conclustion ?????

Stef

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/