Skip to contentSkip to conversation

IPSEC FIRST LIGHT! (by non-kernel developer :-))

LARTC bert hubert 1 participant 1 message Nov 7, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines · David S. Miller

Really, if this one doesn't apply, your 2.5 bitkeeper tree is not totally uptodate.

It works in transport mode! Both EH/ASP.

Hints:
Use the latest bitkeeper sources as of Thurday morning MET

Apply the last patch Alexey sent in the 'silly advise' thread
on linux kernel mailinglist

Do not compile anything AH/ESP/CRYPTO as modules
failed for me with bad oops

Make very very sure that you are not filtering ipsec packets
iptables needs to allow protocols 50 and 51

Use the KAME tools port on ftp://ftp.inr.ac.ru/ip-routing/ipsec/
racoon won't compile, you don't need it yet point it at your 2.5.46+bk+davem tree (edit GNUMakefiles)

Use 3des-cbc
examples online use blowfish-cbc but that gives an error in setkey

Configuration (needs the setkey tool) on 10.0.0.11:

#!./setkey -f
flush;
spdflush;

# AH
add 10.0.0.11 10.0.0.216 ah 15700 -A hmac-md5 "1234567890123456"; add 10.0.0.216 10.0.0.11 ah 24500 -A hmac-md5 "1234567890123456";

# ESP
add 10.0.0.11 10.0.0.216 esp 15701 -E 3des-cbc "123456789012123456789012"; add 10.0.0.216 10.0.0.11 esp 24501 -E 3des-cbc "123456789012123456789012";

spdadd 10.0.0.216 10.0.0.11 icmp -P out ipsec

           esp/transport//use
           ah/transport//use;

Configuration on 10.0.0.216:

#!./setkey -f
flush;
spdflush;

# AH
add 10.0.0.11 10.0.0.216 ah 15700 -A hmac-md5 "1234567890123456"; add 10.0.0.216 10.0.0.11 ah 24500 -A hmac-md5 "1234567890123456";

# ESP
add 10.0.0.11 10.0.0.216 esp 15701 -E 3des-cbc "123456789012123456789012"; add 10.0.0.216 10.0.0.11 esp 24501 -E 3des-cbc "123456789012123456789012";

# this is reversed
spdadd 10.0.0.11 10.0.0.216 icmp -P out ipsec
           esp/transport//use
           ah/transport//use;
# ping 10.0.0.11
PING 10.0.0.11 (10.0.0.11) from 10.0.0.216 : 56(84) bytes of data.
64 bytes from 10.0.0.11: icmp_seq=1 ttld time=1.11 ms
$ sudo tcpdump -n -i eth0 -p 
tcpdump: listening on eth0
13:55:42.381669 10.0.0.216 > 10.0.0.11: AH(spi=0x00005fb4,seq=0x39):
ESP(spi=0x00005fb5,seq=0x39) (DF)
13:55:42.382518 10.0.0.11 > 10.0.0.216: AH(spi=0x00003d54,seq=0x39):
ESP(spi=0x00003d55,seq=0x39)

Great work everybody! I'm very impressed.

Regards,

bert

Signature · 5 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/