Hierarchy Token Bucket for 2.4.18 (RH 8.0) (or new kernel?)
After Stef's advice to use the Hierarchy Token Bucket for my QoS needs, I've run across the problem of recompiling the kernel. I've always tried to stay away from this (although have done it) - but I'd appreciate some hand holding.
The kernel is RedHat 8.0 2.4.18-18, and maybe I'm escaping myself, I've found
/lib/modules/2.4.18-18.8.0/kernel/net/sched/sch_htb.o
The source for this shows a version tag of:
* $Id: sch_htb.c,v 1.13 2002/05/25 09:04:50 devik Exp $
If this really needs recompiling, then where is the best place to find the new kernel source (I'd prefer to be able to get it from RedHat- I'm guessing I can't just use 2.4.18 config file), and which version should I find.
What other tools, if any, will need recompiling after the new kernel is in place?
Thanks for bearing with me this far....
Signature · 6 lines
NAME : Adam Allen. EMAIL : [email protected] COMMENT : ~~~~ insert your favourite signature comment here ~~~~ PGP : http://search.keyserver.net:11371/pks/lookup?op=vindex&search=adam%40dynamicinteraction.co.uk
Quoted 6 lines · Mr. Adam ALLEN
After Stef's advice to use the Hierarchy Token Bucket for my QoS needs, I've run across the problem of recompiling the kernel. I've always tried to stay away from this (although have done it) - but I'd appreciate some hand holding.
Quoted 6 lines
The kernel is RedHat 8.0 2.4.18-18, and maybe I'm escaping myself, I've found
/lib/modules/2.4.18-18.8.0/kernel/net/sched/sch_htb.oThe source for this shows a version tag of:
* $Id: sch_htb.c,v 1.13 2002/05/25 09:04:50 devik Exp $
I think this is the latest htb version (htb 3.6). So you don't need to patch and compile a new kernel if you want htb support.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/