reset rules ?
Dear All
Do you know if its possible to reset the rule with a single command or
if I must delete manually all the rule ?
thanks
Fabien
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Fabio,
I use a short snippet of shell to do it:
# ip rule show | grep -Ev '^(0|3276(6|7)):' \
Quoted 3 lines
| while read PRIO RULE ; do \
ip rule del prio ${PRIO%:} $RULEdone
I'm not aware of a more elegant way to do this. Anybody else?
-Martin
On Tue, 19 Nov 2002, fabio wrote:
: Dear All
: Do you know if its possible to reset the rule with a single command or : if I must delete manually all the rule ?
: thanks
:
: Fabien
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
Signature · 6 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thank you Martin, but an other thing how delete this type of rule :
32761: from all to 172.18.200.6 lookup main
When I try with your script and the command : ip rule del from all to 172.18.200.6 lookup main the result is the same : Error: an inet prefix is expected rather than "all" thks
Fabio
Quoted 30 lines · Martin A. Brown
Fabio,
I use a short snippet of shell to do it:
# ip rule show | grep -Ev '^(0|3276(6|7)):' \Quoted 5 lines
| while read PRIO RULE ; do \
ip rule del prio ${PRIO%:} $RULE
doneI'm not aware of a more elegant way to do this. Anybody else?
-Martin
On Tue, 19 Nov 2002, fabio wrote:
: Dear All
: Do you know if its possible to reset the rule with a single command or : if I must delete manually all the rule ? : thanks
: : Fabien
: : _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
Yes,
I rarely use "all", but have used it for NAT rules in the past.
Here's a snippet I've used for NAT rules, you'll need to fix it to handle all rules, but I'll leave that as an exercise to you:
<snip>
ip rule show | grep map-to | while read PRIO NATRULE; do
ip rule del prio ${PRIO%%:*} $( echo $NATRULE | sed 's|all|0/0|' )done
</snip>
If you wish to see the entire script, check out:
script file: http://plorf.net/linux-ip/html/scripts/nat
config file: http://plorf.net/linux-ip/html/scripts/static-nat
Good luck,
-Martin
On Wed, 20 Nov 2002, fabio wrote:
: Thank you Martin, but an other thing how delete this type of rule :
: 32761: from all to 172.18.200.6 lookup main
:
: When I try with your script and the command : ip rule del from all to : 172.18.200.6 lookup main
: the result is the same : Error: an inet prefix is expected rather than : "all"
: thks
:
: Fabio
:
: Martin A. Brown a écrit:
:
: >Fabio,
: >
: >I use a short snippet of shell to do it:
: >
: ># ip rule show | grep -Ev '^(0|3276(6|7)):' \
: >
: >
: >> | while read PRIO RULE ; do \
: >> ip rule del prio ${PRIO%:} $RULE
: >> done
: >>
: >>
: >
: >I'm not aware of a more elegant way to do this. Anybody else? : >
: >-Martin
: >
: >On Tue, 19 Nov 2002, fabio wrote:
: >
: > : Dear All
: > : Do you know if its possible to reset the rule with a single command or : > : if I must delete manually all the rule ?
: > : thanks
: > :
: > : Fabien
: > :
: > : _______________________________________________
: > : LARTC mailing list / [email protected]
: > : http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
: > :
: >
: >
: >
:
:
Signature · 6 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/