Problem in advanced routing with FTP
I have a router with 2 isp's connected.
My default route is by isp1, and i mark packets to port 80 and port 21 with mark 2.
with: ip rule ls
0: from all lookup local
32765: from all fwmark 2 lookup 200
32766: from all lookup main
32767: from all lookup 253
and in table 200 i have the route by isp2.
My http traffic goes well, but ftp doesn't.
Using Passive mode all works well, but with active it doest work, because the ftp server callsback with port 20.
Please note that isp2 is masqueraded and i have ip_conntrack_ftp in the kernel.
Thanks for any advice.
Nuno Fernandes
Signature · 2 lines
Nuno Miguel Pais Fernandes <[email protected]> Eurotux S.A.
I believe you can use the "helper" module:
http://www.iptables.org/documentation/pomlist/pom-submitted.html#helper
and mark the related packets like so:
iptables -t mangle -A PREROUTING -m helper --helper ftp -j MARK --set-mark 2
This is just an idea and I have not tested this solution personally.
Ramin
Quoted 20 lines · Nuno Miguel Pais Fernandes
I have a router with 2 isp's connected.
My default route is by isp1, and i mark packets to port 80 and port 21 with mark 2.
with: ip rule ls
0: from all lookup local
32765: from all fwmark 2 lookup 200
32766: from all lookup main
32767: from all lookup 253and in table 200 i have the route by isp2.
My http traffic goes well, but ftp doesn't.
Using Passive mode all works well, but with active it doest work, because the ftp server callsback with port 20.
Please note that isp2 is masqueraded and i haveip_conntrack_ftpin the kernel.
Quoted 8 lines
Thanks for any advice.
Nuno Fernandes
Signature · 2 lines
Nuno Miguel Pais Fernandes <[email protected]> Eurotux S.A.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 12 lines · Nuno Miguel Pais Fernandes
I have a router with 2 isp's connected.
My default route is by isp1, and i mark packets to port 80 and port 21 with mark 2.
with: ip rule ls
0: from all lookup local
32765: from all fwmark 2 lookup 200
32766: from all lookup main
32767: from all lookup 253
Quoted 5 lines
and in table 200 i have the route by isp2.
My http traffic goes well, but ftp doesn't.
Using Passive mode all works well, but with active it doest work, because the ftp server callsback with port 20.
You can use the iptables helper to mark all the ftp packets. Even the active ftp packets if they use a dynamic port.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/