Skip to contentSkip to conversation

always beeing able to login via ssh

LARTC Peter Holm 2 participants 4 messages Nov 25, 2002

lore
Share & tools
lore
#1 lore raw
Quoted 5 lines · Peter Holm

Hi,

how do i have to configure HTB or any other traffic shaping software if I want to keep enough "headroom" to always beeing able to connect to a server via ssh, even if there is a lot of traffic?

If you split the traffic and put the ssh and non-ssh traffic in 2 separated classes, you will get some improvements. Give the ssh class a higher priority and you will get some more improvements. If you want very good respons, you can limit all the non-ssh traffic so it can never use 100%. If you give it a maximum of 99% of the link, the other 1% is direct available for ssh.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#2 lore raw
In reply to Peter Holm
Quoted 6 lines · you

If you split the traffic and put the ssh and non-ssh traffic in 2 separated classes, you will get some improvements. Give the ssh class a higher priority and you will get some more improvements. If you want very good respons, you can limit all the non-ssh traffic so it can never use 100%. If you give it a maximum of 99% of the link, the other 1% is direct available for ssh.

How is the syntax for limiting all non-ssh traffic to 99% ?

Thanks for your attention!

Have a nice thread,
Peter
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Peter Holm
Quoted 9 lines · Peter Holm
Quoted 6 lines · you

If you split the traffic and put the ssh and non-ssh traffic in 2 separated classes, you will get some improvements. Give the ssh class a higher priority and you will get some more improvements. If you want very good respons, you can limit all the non-ssh traffic so it can never use 100%. If you give it a maximum of 99% of the link, the other 1% is direct available for ssh.

How is the syntax for limiting all non-ssh traffic to 99% ?

See lartc.org and www.docum.org

Basically, you have to add a cbq or htb root qdisc with 2 classes. One for the ssh traffic, the other for non-ssh traffic. The ssh class has a rate of 1% of you link, the other 99%. And you need 2 filters. One for the ssh traffic (dport = 22) and an other that match all the traffic so you can put the traffic in the classes.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/