Skip to contentSkip to conversation

Performance analysis for qos

LARTC Kristiadi Himawan 2 participants 4 messages Nov 27, 2002 – Nov 28, 2002

lore
Share & tools
lore
#0 lore raw

Hi,
i have tried some qdisc from linux kernel, it's interesting to test the performance from each qdisc,
i have see the devik analysis page, but don't know what's the scenario and the analysis tools that used. anybody know some scenarios and tools to test and see the performance from cbq tbf sfq htb red ... etc ?

Best regards,

Quoted 1 line

--<Kristiadi Himawan>--<

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines · Kristiadi Himawan

Hi,
i have tried some qdisc from linux kernel, it's interesting to test the performance from each qdisc,
i have see the devik analysis page, but don't know what's the scenario and the analysis tools that used. anybody know some scenarios and tools to test and see the performance from cbq tbf sfq htb red ... etc ?

What do you want to test? Do you want to know how accurate the shaping is done, or do you want to know how many resources (memory/cpu) this asks?

For the accurate tests, there are some tools around. You can use the great ethloop tool from the htb page for htb testing. I also have some scripts to test/monitor htb pages.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Kristiadi Himawan

I want to test anything that consider with qdisc, latency, accurate, memory/cpu utilization, and may be another factor ...

Any idea and information would be very helpfull and appreciated.

On Wed, 27 Nov 2002, Stef Coene wrote:

|Date: Wed, 27 Nov 2002 22:00:40 +0100
|From: Stef Coene <[email protected]>
|To: Kristiadi Himawan <[email protected]>, lartc <[email protected]>
|Subject: Re: [LARTC] Performance analysis for qos
|
|What do you want to test?  Do you want to know how accurate the shaping is 
|done, or do you want to know how many resources (memory/cpu) this asks?
|
|For the accurate tests, there are some tools around.  You can use the great 
|ethloop tool from the htb page for htb testing.  I also have some scripts to 
|test/monitor htb pages.
|
|Stef
|
|-- 

Best regards,

Quoted 1 line

--<Kristiadi Himawan>--<

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Kristiadi Himawan
Quoted 5 lines · Kristiadi Himawan

I want to test anything that consider with qdisc, latency, accurate, memory/cpu utilization, and may be another factor ...

Any idea and information would be very helpfull and appreciated.

The only thing you can do is creating a test setup and monitor what happens if you generate a lot of traffic.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/