Skip to contentSkip to conversation

LARTC digest, Vol 1 #907 - 2 msgs

LARTC Brian Capouch 2 participants 2 messages Dec 5, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines

From: Stef Coene <[email protected]>
;

Quoted 2 lines

does it matter that the rate is being reported differently by each invocation of tc?

Quoted 9 lines

I don't know exactly how the rate is calculated, but I don't think you sh> ould not trust it.

Quoted 2 lines

The upload speed of the first runs 252, 258, 254, etc.; on the second 86, 150, 92, 78, etc.

Is this reported by tc or by iperf ??

By iperf.

One little detail, and I guess this is the explaining fact but it's interesting to think about why: all the machines reported on here are using wireless access. The two which are working well have no jitter or packet loss, but the two that are acting up both have a fair amount of jitter, and about 6-8% packet loss because of their being marginal links.

I'm assuming that is the explanation (I hadn't thoroughly tested the link quality before sending that other mail) but I wonder why. They show average throughput well above the rate limits I set when they are operating without HTB.

Thanks.

B.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 23 lines · Brian Capouch
Quoted 6 lines

From: Stef Coene <[email protected]>
;

Quoted 2 lines

does it matter that the rate is being reported differently by each invocation of tc?

Quoted 8 lines

I don't know exactly how the rate is calculated, but I don't think you sh= ould=20
not trust it.

Quoted 2 lines

The upload speed of the first runs 252, 258, 254, etc.; on the second 86, 150, 92, 78, etc.

Is this reported by tc or by iperf ??

By iperf.

One little detail, and I guess this is the explaining fact but it's interesting to think about why: all the machines reported on here are using wireless access. The two which are working well have no jitter or packet loss, but the two that are acting up both have a fair amount of jitter, and about 6-8% packet loss because of their being marginal links.

Quoted 4 lines

I'm assuming that is the explanation (I hadn't thoroughly tested the link quality before sending that other mail) but I wonder why. They show average throughput well above the rate limits I set when they are operating without HTB.

Maybe they are generating more bursts and it's possible that your htb setup allows bursts. So at the long-term, they can get a higher rate. Otherwise, I don't know.

Stef

Signature · 9 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/