HTB problems
Hello,
I have HTB on IMQ device. My rate does not work as I configured. I
configured 1920kbit/s and I can download only about 290kbit/s (while it should be the whole bandwidth).
My script:/sbin/modprobe imq numdevs=1/usr/local/sbin/tc qdisc del dev imq0 root 2> /dev/null > /dev/null /usr/local/sbin/tc qdisc del dev imq0 ingress 2> /dev/null > /dev/null /sbin/ifconfig imq0 down/usr/local/sbin/iptables -t mangle -D PREROUTING -i eth2 -j IMQ --todev 0 2> /dev/null/usr/local/sbin/iptables -t mangle -D POSTROUTING -o eth2 -j IMQ --todev 0 2> /dev/null/usr/local/sbin/tc qdisc add dev imq0 root handle 1: htb default 10 /usr/local/sbin/tc class add dev imq0 parent 1: classid 1:1 htb rate 1920kbit/usr/local/sbin/tc class add dev imq0 parent 1:1 classid 1:60 htb rate 1024kbit ceil 1024kbit/usr/local/sbin/tc qdisc add dev imq0 parent 1:60 handle 60: pfifo limit 2 /usr/local/sbin/tc class add dev imq0 parent 1:1 classid 1:40 htb rate 128kbit ceil 128kbit/usr/local/sbin/tc qdisc add dev imq0 parent 1:40 handle 40: pfifo limit 2 /usr/local/sbin/tc class add dev imq0 parent 1:1 classid 1:10 htb rate 704kbit ceil 1920kbit/usr/local/sbin/tc qdisc add dev imq0 parent 1:10 handle 10: pfifo limit 2 /usr/local/sbin/tc class add dev imq0 parent 1:1 classid 1:30 htb rate 128kbit ceil 128kbit/usr/local/sbin/tc qdisc add dev imq0 parent 1:30 handle 30: pfifo limit 2 /usr/local/sbin/tc class add dev imq0 parent 1:1 classid 1:20 htb rate 64kbit ceil 64kbit/usr/local/sbin/tc qdisc add dev imq0 parent 1:20 handle 20: pfifo limit 2 /usr/local/sbin/tc class add dev imq0 parent 1:1 classid 1:50 htb rate 128kbit ceil 128kbit/usr/local/sbin/tc qdisc add dev imq0 parent 1:50 handle 50: pfifo limit 2 /usr/local/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.102.0/24 flowid 1:60/usr/local/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.101.42 flowid 1:40/usr/local/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.100.0/27 flowid 1:10/usr/local/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.1.170 flowid 1:10/usr/local/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.101.38 flowid 1:30/usr/local/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.101.34 flowid 1:20/usr/local/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.103.0/24 flowid 1:50 /usr/local/sbin/iptables -t mangle -A PREROUTING -i eth2 -j IMQ --todev 0 /sbin/ip link set imq0 up
Everything (tested what I did) went to class 1:10
Some stats:
Class statistics:
-------------------
class htb 1:1 root rate 1920Kbit ceil 1920Kbit burst 4056b/8 mpu 0b cburst 4056b/8 mpu 0b level 7
Sent 8642235 bytes 8393 pkts (dropped 0, overlimits 0)
rate 36918bps 36pps
lended: 4775 borrowed: 0 giants: 0
tokens: 13363 ctokens: 13363
class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 9011 rate 704Kbit ceil 1920Kbit burst 2500b/8 mpu 0b cburst 4056b/8 mpu 0b level 0
Sent 8642235 bytes 8393 pkts (dropped 2153, overlimits 0) rate 36918bps 36pps
lended: 3618 borrowed: 4775 giants: 0
tokens: 22301 ctokens: 13363
the rate 36918bps was a constant rate for 10 minutes (I copyed with scp a big file).
Thanks in advance,
Thomas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Thomas Jalsovsky
I have HTB on IMQ device. My rate does not work as I configured. I
configured 1920kbit/s and I can download only about 290kbit/s (while
Set your pfifo limit higher. You have too much dropped packets.
Quoted 6 lines
class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 9011 rate 704Kbit ceil 1920Kbit burst 2500b/8 mpu 0b cburst 4056b/8 mpu 0b level 0
Sent 8642235 bytes 8393 pkts (dropped 2153, overlimits 0) rate 36918bps 36pps
lended: 3618 borrowed: 4775 giants: 0
tokens: 22301 ctokens: 13363
Zdravim/Regards
Vladimir Smelhaus
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 12 lines · Vladimir Smelhaus
Quoted 2 lines · Thomas Jalsovsky
I have HTB on IMQ device. My rate does not work as I configured. I
configured 1920kbit/s and I can download only about 290kbit/s (whileSet your pfifo limit higher. You have too much dropped packets.
Quoted 5 lines
class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 9011 rate 704Kbit ceil 1920Kbit burst 2500b/8 mpu 0b cburst 4056b/8 mpu 0b level 0
Sent 8642235 bytes 8393 pkts (dropped 2153, overlimits 0) rate 36918bps 36pps
lended: 3618 borrowed: 4775 giants: 0
I have:
ifconfig imq0
imq0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING NOARP MTU:1500 Metric:1
RX packets:821349 errors:0 dropped:0 overruns:0 frame:0
TX packets:723509 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:30
RX bytes:456249915 (435.1 Mb) TX bytes:391405155 (373.2 Mb)Which value if txqueuelen should be good for me? Or you though for anything else (in lartc pfifo limit is txqueuelen..)
Thanks,
Thomas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 18 lines · Thomas Jalsovsky
Quoted 12 lines · Vladimir Smelhaus
Quoted 2 lines · Thomas Jalsovsky
I have HTB on IMQ device. My rate does not work as I configured. I
configured 1920kbit/s and I can download only about 290kbit/s (whileSet your pfifo limit higher. You have too much dropped packets.
Quoted 5 lines
class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 9011 rate 704Kbit ceil 1920Kbit burst 2500b/8 mpu 0b cburst 4056b/8 mpu 0b level 0
Sent 8642235 bytes 8393 pkts (dropped 2153, overlimits 0) rate 36918bps 36pps
lended: 3618 borrowed: 4775 giants: 0I have:
ifconfig imq0
imq0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
Quoted 8 lines
UP RUNNING NOARP MTU:1500 Metric:1 RX packets:821349 errors:0 dropped:0 overruns:0 frame:0 TX packets:723509 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:30 RX bytes:456249915 (435.1 Mb) TX bytes:391405155 (373.2 Mb)Which value if txqueuelen should be good for me? Or you though for anything else (in lartc pfifo limit is txqueuelen..)
Sorry, it was my mistake, I had limit 2 in my configuration. Now I have the default - 30p - and it works fine for me.
Thank you for your help.
Regards,
Thomas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/