Skip to contentSkip to conversation

questions on CBQ

LARTC James Ma 3 participants 3 messages Dec 9, 2002 – Dec 10, 2002

lore
Share & tools
lore

James Ma

author
#0 lore raw

Hi, All,

When I use CBQ, what should I put for "avpkt"? I saw all the examples using 1000, but if I have a lot of voice packets which are very small, will "avpkt 1000" cause any problem? Another thing is, does CBQ support "default" as HTB does (ex: tc qdisc add dev eth0 root handle 1: htb default 12)? How can I put "all other traffic" into certain class?

Thanks,

James

#1 lore raw
Quoted 5 lines · James Ma

Hi, All,

When I use CBQ, what should I put for "avpkt"? I saw all the examples using 1000, but if I have a lot of voice packets which are very small, will "avpkt 1000" cause any problem?

I'm not sure, but avpkt is used in internal calculations so if you have a lot of small packets, a smaller value would be better.

Quoted 3 lines

Another thing is, does CBQ support
"default" as HTB does (ex: tc qdisc add dev eth0 root handle 1: htb default 12)? How can I put "all other traffic" into certain class?

Cbq has no default class. You can use a u32 filter with src 0/0 as the last filter statement.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to James Ma
Quoted 5 lines · Stef Coene
Quoted 2 lines · James Ma

Hi, All,

Quoted 8 lines
Quoted 5 lines

When I use CBQ, what should I put for "avpkt"? I saw all the examples using 1000, but if I have a lot of voice packets which are very small, will "avpkt 1000" cause any problem?

I'm not sure, but avpkt is used in internal calculations so if you have a lot of small packets, a smaller value would be better.

avpkt is one of the parameters used to evaluate the maxidle parameter for a cbq class.
maxidle can be seen as the maximum credit that a class can reach when being underlimit for a period of time
So the higher maxidle is, the more packets in burst the class may send when switching from underlimit to overlimit.

Quoted 15 lines
Quoted 8 lines

Another thing is, does CBQ support
"default" as HTB does (ex: tc qdisc add dev eth0 root handle 1: htb default 12)? How can I put "all other traffic" into certain class?

Cbq has no default class. You can use a u32 filter with src 0/0 as the last filter statement.

Stef

Signature · 7 lines
Vincent EGAL
Email : [email protected]


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/