Am I correct?
I've got some customers that have lots of bandwidth that are uploading and downloading files to our https:// help desk and are using up all of my T-1 at times. This leaves other customers sucking wind. I've taken a look at the '15.10. Example of a full nat solution with QoS' section. Would it work for me if I change the section that says eth0 to my internet adapter Serial0? If I can do that, will that allow fair sharing between all my customers of the
https:// help desk?
My setup:
////////// ///////////////// /////// https:// |-- |eth0 * Serial0 |-- |INET | ////////// ///////////////// ///////
My proposed script:
CEIL20 # actual is 1024Kbit
IFACE=Serial0
tc qdisc add dev $IFACE root handle 1: htb default 15
tc class add dev $IFACE parent 1: classid 1:1 htb rate ${CEIL}kbit ceil ${CEIL}kbit
tc class add dev $IFACE parent 1:1 classid 1:10 htb rate 170kbit ceil 170kbit prio 0
tc class add dev $IFACE parent 1:1 classid 1:11 htb rate 170kbit ceil ${CEIL}kbit prio 1
tc class add dev $IFACE parent 1:1 classid 1:12 htb rate 170kbit ceil ${CEIL}kbit prio 2
tc class add dev $IFACE parent 1:1 classid 1:13 htb rate 170kbit ceil ${CEIL}kbit prio 2
tc class add dev $IFACE parent 1:1 classid 1:14 htb rate 170kbit ceil ${CEIL}kbit prio 3
tc class add dev $IFACE parent 1:1 classid 1:15 htb rate 170kbit ceil ${CEIL}kbit prio 3
tc qdisc add dev $IFACE parent 1:12 handle 120: sfq perturb 10 tc qdisc add dev $IFACE parent 1:13 handle 130: sfq perturb 10 tc qdisc add dev $IFACE parent 1:14 handle 140: sfq perturb 10 tc qdisc add dev $IFACE parent 1:15 handle 150: sfq perturb 10
tc filter add dev $IFACE parent 1:0 protocol ip prio 1 handle 1 fw classid 1:10
tc filter add dev $IFACE parent 1:0 protocol ip prio 2 handle 2 fw classid 1:11
tc filter add dev $IFACE parent 1:0 protocol ip prio 3 handle 3 fw classid 1:12
tc filter add dev $IFACE parent 1:0 protocol ip prio 4 handle 4 fw classid 1:13
tc filter add dev $IFACE parent 1:0 protocol ip prio 5 handle 5 fw classid 1:14
tc filter add dev $IFACE parent 1:0 protocol ip prio 6 handle 6 fw classid 1:15
iptables -t mangle -I PREROUTING -p icmp -j MARK --set-mark 0x1 iptables -t mangle -I PREROUTING -p icmp -j RETURN
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport ssh -j MARK --set-mark 0x1
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport ssh -j RETURN iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x1
iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport https -j MARK --set-mark 0x3
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport https -j RETURN
iptables -t mangle -I PREROUTING -m tos --tos Minimize-Delay -j MARK --set-mark 0x1
iptables -t mangle -I PREROUTING -m tos --tos Minimize-Delay -j RETURN iptables -t mangle -I PREROUTING -m tos --tos Minimize-Cost -j MARK --set-mark 0x5
iptables -t mangle -I PREROUTING -m tos --tos Minimize-Cost -j RETURN iptables -t mangle -I PREROUTING -m tos --tos Maximize-Throughput -j MARK --set-mark 0x6
iptables -t mangle -I PREROUTING -m tos --tos Maximize-Throughput -j RETURN
Thanks in advance for any suggestions
Bernard
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 76 lines · On Wednesday 18 December 2002 22:12, [email protected] wrote:
I've got some customers that have lots of bandwidth that are uploading and downloading files to our https:// help desk and are using up all of my T-1 at times. This leaves other customers sucking wind. I've taken a look at the '15.10. Example of a full nat solution with QoS' section. Would it work for me if I change the section that says eth0 to my internet adapter Serial0? If I can do that, will that allow fair sharing between all my customers of the https:// help desk?
My setup:
////////// ///////////////// /////// https:// |-- |eth0 * Serial0 |-- |INET | ////////// ///////////////// ///////My proposed script:
CEIL=1020 # actual is 1024Kbit
IFACE=Serial0tc qdisc add dev $IFACE root handle 1: htb default 15
tc class add dev $IFACE parent 1: classid 1:1 htb rate ${CEIL}kbit ceil ${CEIL}kbit
tc class add dev $IFACE parent 1:1 classid 1:10 htb rate 170kbit ceil 170kbit prio 0
tc class add dev $IFACE parent 1:1 classid 1:11 htb rate 170kbit ceil ${CEIL}kbit prio 1
tc class add dev $IFACE parent 1:1 classid 1:12 htb rate 170kbit ceil ${CEIL}kbit prio 2
tc class add dev $IFACE parent 1:1 classid 1:13 htb rate 170kbit ceil ${CEIL}kbit prio 2
tc class add dev $IFACE parent 1:1 classid 1:14 htb rate 170kbit ceil ${CEIL}kbit prio 3
tc class add dev $IFACE parent 1:1 classid 1:15 htb rate 170kbit ceil ${CEIL}kbit prio 3tc qdisc add dev $IFACE parent 1:12 handle 120: sfq perturb 10 tc qdisc add dev $IFACE parent 1:13 handle 130: sfq perturb 10 tc qdisc add dev $IFACE parent 1:14 handle 140: sfq perturb 10 tc qdisc add dev $IFACE parent 1:15 handle 150: sfq perturb 10
tc filter add dev $IFACE parent 1:0 protocol ip prio 1 handle 1 fw classid 1:10
tc filter add dev $IFACE parent 1:0 protocol ip prio 2 handle 2 fw classid 1:11
tc filter add dev $IFACE parent 1:0 protocol ip prio 3 handle 3 fw classid 1:12
tc filter add dev $IFACE parent 1:0 protocol ip prio 4 handle 4 fw classid 1:13
tc filter add dev $IFACE parent 1:0 protocol ip prio 5 handle 5 fw classid 1:14
tc filter add dev $IFACE parent 1:0 protocol ip prio 6 handle 6 fw classid 1:15iptables -t mangle -I PREROUTING -p icmp -j MARK --set-mark
0x1iptables -t mangle -I PREROUTING -p icmp -j RETURN
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport ssh -j MARK --set-mark0x1
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport ssh -j RETURN iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark0x1
iptables -t mangle -I PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j RETURN
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport https -j MARK --set-mark0x3
iptables -t mangle -I PREROUTING -p tcp -m tcp --sport https -j RETURNiptables -t mangle -I PREROUTING -m tos --tos Minimize-Delay -j MARK --set-mark
0x1
iptables -t mangle -I PREROUTING -m tos --tos Minimize-Delay -j RETURN iptables -t mangle -I PREROUTING -m tos --tos Minimize-Cost -j MARK --set-mark0x5
iptables -t mangle -I PREROUTING -m tos --tos Minimize-Cost -j RETURN iptables -t mangle -I PREROUTING -m tos --tos Maximize-Throughput -j MARK --set-mark0x6
iptables -t mangle -I PREROUTING -m tos --tos Maximize-Throughput -j RETURN
Quoted 1 line
Thanks in advance for any suggestions
I think this is a good script.
But different prio's for filters are not usefull. They only determine the order the filters are matched. And in your case, there is no specific order. In fact, if you add 1 fw filter with no handle parameter, the mark will be used as filter key. So packets marked with 16 will end up in class 1:16. I think this will save more CPU cycles.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/