Skip to contentSkip to conversation

linux bridging and htb.init / cbq.init

LARTC Maik Ellinger 2 participants 2 messages Dec 19, 2002

lore
Share & tools
lore
#0 lore raw

Hello,

I'am successful using a linux (2.4.20) bridge and the cbq.init_v0.7
script for traffic shaping. But I can only use the queuing discipline tbf (LEAF=tbf). If I try use queuing discipline sfq or none then tc
applies the rules but no shaping occurs.
Is this problem a normal behavior when using bridging ?

I tried to use htb.init (using patched tc binary). It accepts the rules but also no shaping occurs (tested with all queuing disciplines (LEAF=none|sfq|pfifo).
Why it doesn't work together with bridging ?

Thanks, Maik

Signature · 7 lines
VFS: Busy inodes after unmount. Self-destruct in 5 seconds.  Have a nice 
day...
GPG-Key: http://www.m-ellinger.de/output/mael.gpg
Mitglied der Zwickau Linux User Group zLUG e.V. -> http://www.zlug.org
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 11 lines

I'am successful using a linux (2.4.20) bridge and the cbq.init_v0.7
script for traffic shaping. But I can only use the queuing discipline tbf (LEAF=tbf). If I try use queuing discipline sfq or none then tc
applies the rules but no shaping occurs.
Is this problem a normal behavior when using bridging ?

I tried to use htb.init (using patched tc binary). It accepts the rules but also no shaping occurs (tested with all queuing disciplines (LEAF=none|sfq|pfifo).
Why it doesn't work together with bridging ?

Works for me. View my previous post about exceeding limits. It
applies to this setup with shaping bridged traffic.

Mindaugas

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/