Skip to contentSkip to conversation

Depth-argument for sfq?

LARTC Steen Suder, privat 4 participants 4 messages Jan 6, 2003

lore
Share & tools
lore
#0 lore raw

I'm not a programmer per se (including C), but...

I'd like to be able to give the define in sch_sfq.c (of, say, 2.4.20), SFS_DEPTH other values than 128 as an argument on the tc commandline. It could be powers of two up to 2^7 (128) as it seems that 128 is the current maximum.

I'm a little anxious to ask the question "How do I do that?" ;-) Instead I'd like to hear if anyone has done something similar?

Signature · 7 lines
Mvh. / Best regards,
Steen Suder		<http://www.suder.dk/>
ICQ UIN			4133803

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 10 lines · privat

I'm not a programmer per se (including C), but...

I'd like to be able to give the define in sch_sfq.c (of, say, 2.4.20), SFS_DEPTH other values than 128 as an argument on the tc commandline. It could be powers of two up to 2^7 (128) as it seems that 128 is the current maximum.

I'm a little anxious to ask the question "How do I do that?" ;-) Instead I'd like to hear if anyone has done something similar?

AFAIK a qdisc named "esfq" allready exists where you can setup things like Depth and other parameter.
search the mailling-list archive on lartc.org for the URL (last time i compilied it was for 2.4.18; i hope they made the code 2.4.20 ready ?)

Greetings

Tobias

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Steen Suder, privat
Quoted 8 lines · Tobias Geiger
Quoted 7 lines · privat

I'm not a programmer per se (including C), but...

I'd like to be able to give the define in sch_sfq.c (of, say, 2.4.20), SFS_DEPTH other values than 128 as an argument on the tc commandline. It could be powers of two up to 2^7 (128) as it seems that 128 is the current maximum.

Quoted 7 lines
Quoted 2 lines

I'm a little anxious to ask the question "How do I do that?" ;-) Instead I'd like to hear if anyone has done something similar?

AFAIK a qdisc named "esfq" allready exists where you can setup things like Depth and other parameter.
search the mailling-list archive on lartc.org for the URL (last time i compilied it was for 2.4.18; i hope they made the code 2.4.20 ready ?)

I have it on the faq page on www.docum.org.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Steen Suder, privat

http://www.ssi.bg/~alex/esfq/index.html

-- Nikolay Datchev

Quoted 22 lines · Stef Coene
Quoted 8 lines · Tobias Geiger
Quoted 7 lines · privat

I'm not a programmer per se (including C), but...

I'd like to be able to give the define in sch_sfq.c (of, say, 2.4.20), SFS_DEPTH other values than 128 as an argument on the tc commandline. It could be powers of two up to 2^7 (128) as it seems that 128 is the current maximum.

Quoted 7 lines
Quoted 2 lines

I'm a little anxious to ask the question "How do I do that?" ;-) Instead I'd like to hear if anyone has done something similar?

AFAIK a qdisc named "esfq" allready exists where you can setup things like Depth and other parameter.
search the mailling-list archive on lartc.org for the URL (last time i compilied it was for 2.4.18; i hope they made the code 2.4.20 ready ?)

I have it on the faq page on www.docum.org.

Stef

--

Quoted 9 lines

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/