HTB classes, ceil and prio
Hello,
I'm looking some recommendation how to configure htb.
I have ADSL 512k/256k connection at my home for the 3 clients PCs and one Linux Box like firewall.
Network looks like usual:
ADSL connection (eth0) - | firewall | - (eth1) local network
I would like to divide Internet connection like this:
Download eth0 (512K)
SSH/IPSec rate%6k, ceilQ2k and prio=0 (it can be used from the local PC1 or PC2)
PC1 1.2.3.1(local ip) rate0k, ceilQ2k and prio=1
PC2 1.2.3.2 (local ip) rate0k, ceilQ2k and prio=1
PC3 1.2.3.3 (local ip) rate0k, ceilQ2k and prio=1
SMTP server (exist on firewall) ratedk, ceil8k and prio=2 or better 1
Do I understand right if some of PCs (PC1or PC2) use SSH/IPsec it gets speed from 256k up to 512k if it not in use.
Two anothers PCs and SMTP server share 256k between them. Is that right? What speed they get each?
Upload eth0 (256k) htb/imq
SSH/IPSec rate8k, ceil%6k and prio=0 (it can be used from the local PC1 or PC2)
PC1 1.2.3.1(local ip) rate€k, ceil%6k and prio=1
PC2 1.2.3.2 (local ip) rate€k, ceil%6k and prio=1
PC3 1.2.3.3 (local ip) rate€k, ceil%6k and prio=1
SMTP server (exist on firewall) ratedk, ceil8k and prio=2 or better 1
If I'm not correct just correct me, please.
Is it enough to have only one class or more?
I know that running htb on external eth, htb cannot see local ip addresses. Can I mark them with the iptables and use it with the htb?
Or do I have to make htb rules on my local eth1 as well?
Thank you in advance for any help/ideas
Remus
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 18 lines · Remus
Hello,
I'm looking some recommendation how to configure htb.
I have ADSL 512k/256k connection at my home for the 3 clients PCs and one Linux Box like firewall.Network looks like usual:
ADSL connection (eth0) - | firewall | - (eth1) local networkI would like to divide Internet connection like this:
Download eth0 (512K)
SSH/IPSec rate%6k, ceilQ2k and prio=0 (it can be used from the local PC1 or PC2)
PC1 1.2.3.1(local ip) rate0k, ceilQ2k and prio=1
PC2 1.2.3.2 (local ip) rate0k, ceilQ2k and prio=1
PC3 1.2.3.3 (local ip) rate0k, ceilQ2k and prio=1
SMTP server (exist on firewall) ratedk, ceil8k and prio=2 or better 1
Quoted 2 lines
Do I understand right if some of PCs (PC1or PC2) use SSH/IPsec it gets speed from 256k up to 512k if it not in use.
No. If all PC's are generating traffic, PC2 will get (170/(256+170+170+64)*512.
Quoted 11 lines
Two anothers PCs and SMTP server share 256k between them. Is that right? What speed they get each?
Upload eth0 (256k) htb/imq
SSH/IPSec rate8k, ceil%6k and prio=0 (it can be used from the local PC1 or PC2)
PC1 1.2.3.1(local ip) rate€k, ceil%6k and prio=1
PC2 1.2.3.2 (local ip) rate€k, ceil%6k and prio=1
PC3 1.2.3.3 (local ip) rate€k, ceil%6k and prio=1
SMTP server (exist on firewall) ratedk, ceil8k and prio=2 or better 1
Quoted 1 line
If I'm not correct just correct me, please.
It's not so easy to explain how the classe will behave. I have some basic htb shaping rules on www.docum.org on the faq page. If you follow them, it's easier to figure out how much traffic each class will get.
And you also have to tell us how what's the parent-child relation ship between the classes.
Quoted 3 lines
I know that running htb on external eth, htb cannot see local ip addresses. Can I mark them with the iptables and use it with the htb?
Or do I have to make htb rules on my local eth1 as well?
Indeed, you will have to use firewall marks.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/