Skip to contentSkip to conversation

u32: how to say "all except z.x.y"?

LARTC ray-nger 2 participants 2 messages Jan 21, 2003

lore
Share & tools
lore

ray-nger

author
#0 lore raw

Hello Stef,

Quoted 1 line
Quoted 1 line

How I can say "all except z.x.y" ?

SC> Use 2 filters :
SC> 1. all z.x.y to a class
SC> 2. all to an other class
SC> so the second filter matches all except x.y.z
Ok. How it will be for ingress? It have only 1 class, haven't it?

Signature · 6 lines
Best regards,
Ray-Nger      mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 9 lines · ray-nger

Hello Stef,

Quoted 1 line
Quoted 1 line

How I can say "all except z.x.y" ?

SC> Use 2 filters :
SC> 1. all z.x.y to a class
SC> 2. all to an other class
SC> so the second filter matches all except x.y.z
Ok. How it will be for ingress? It have only 1 class, haven't it?

Yes. But the same trick can be used. I suppose you want to rate limit the packets coming from "all except x.y.z". Then rate limit only filter 2. So all packets matched by the 1. filter can pass thru and all packets matched by the 2. filter are rate limited.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/