Skip to contentSkip to conversation

equal bandwith using HTB

LARTC Czakó Krisztián 1 participant 1 message Jan 23, 2003

lore
Share & tools
lore
#0 lore raw

I'd like to set up HTB to share a bandwith equally between machines. This is my situation:

. +-- Clients (1.2.3.140-147)
. [eth1]
Internet -- [comx0] router [br0] --+
. [eth0]
. +-- Servers (currently one:1.2.3.135)

br0 is 1.2.3.130 and the net is 1.2.3.128/26.

Internet speed is 512kbit. Clients are connected via a wireless AP connected to eth1. Servers are connected via an ethernet switch connected to eth0. We need br0 only because of the phisical topology (impossible to connect the AP to the same switch used for the servers).

I would like to give 20% rate to the Servers, and 80% rate to the Clients. I'd like to be sure to share Clients bandwoith equally between each client. Communication between Clients and Servers should be limited to 4mbit.

It works more or less, but when a user starts several tcp downloads, he gets almost all of the bandwith. Of course rates are always respected, but the remaining not shared equally.

I've tried the following:
DEV=br0
BANDWITHH0
LOCALBW=4mbit

tc qdisc del dev $DEV root

tc qdisc add dev $DEV root handle 1: htb default 1 r2q 1

tc class add dev $DEV parent 1: classid 1:1 htb rate ${BANDWITH}kbit prio 2 burst 64k cburst 0k
tc class add dev $DEV parent 1: classid 1:2 htb rate ${LOCALBW} prio 1 burst 128k

USERS=8
USERBW=$[8*${BANDWITH}/10]
SERVERBW=$[2*${BANDWITH}/10]
PERUSERBW=$[$USERBW/$USERS]

tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${USERBW}kbit ceil ${USERBW}kbit prio 4 burst 4k cburst 0k
tc class add dev $DEV parent 1:1 classid 1:11 htb rate ${SERVERBW}kbit ceil ${BANDWITH}kbit prio 3 burst 32k cburst 0k

declare -i NUM=${USERS}
while [ $NUM -ge 1 ]; do
tc class add dev $DEV parent 1:10 classid 1:$[139+$NUM] htb rate
${PERUSERBW}kbit ceil ${USERBW}kbit prio 4 burst 10k cburst 10k
tc filter add dev $DEV parent 1: protocol ip prio 4 u32 match ip dst
1.2.3.$[139+$NUM] flowid 1:$[139+$NUM]
NUM=$NUM-1
done

tc filter add dev $DEV parent 1: protocol ip prio 1 u32 \

        match ip src 1.2.3.128/26 \
        match ip dst 1.2.3.128/26 flowid 1:2
tc filter add dev $DEV parent 1: protocol ip prio 3 u32 \
        match ip dst 1.2.3.135 flowid 1:11
tc filter add dev $DEV parent 1: protocol ip prio 5 u32 \
       match ip dst 0.0.0.0/0 flowid 1:10

Best regards,
Slapic

Signature · 8 lines
Pilatus-Comp Ltd. HUNGARY * The Linux Expert * [email protected]
http://www.linux.co.hu * Phone: +36-1-2481816 * Fax: +36-1-2481817



_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/