Skip to contentSkip to conversation

to classify non-IP packet???

LARTC Liu Zhiyong 1 participant 4 messages Feb 5, 2003 – Feb 10, 2003

lore
Share & tools
lore
#0 lore raw

I implemented a new network protocol(called QRoute), the Eth protocol code is 0x8000(for unicast) and 0x8001(for multicast), and there are 2 kind of QRoute packets: data packet( the first 2 bytes is 0x40), and control packet(the fist 2 bytes is 0x00, 0x10,0x20 or 0x30). There are 3 kinds of packets in the network: IP packets, Qroute(including unicast and multicast) data packets, and Qroute control packet. I want to classify these 3 kinds of packets, how can I do it? I tried to use: "tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10" to classfiy the Qroute unicast packet, but it doesn't work. There is a protocol called "802.1Q" whose Eth protocol code is 0x8001(It can be found in "iproute2/lib/lI_proto.c"), so I tried to use "tc filter add dev eth0 parent 1:0 protocol 802.1Q prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", and it works. but it can't further classify the packets according to the first 2 bytes! And I tried to add protocol {0x8000, "QRoute"} in "iproute2/lib/lI_proto.c and compiled the iproute2 packet again, then tried " tc filter add dev eth0 parent 1:0 protocol QRoute prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", it still doesn't work! anyone can help me ? Thanks very much

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

I have successfully classified QRoute packet from IP packet by adding {0x8000, "qroute"} to /iproute2/lib/ll_protocol.c, and make iproute2 again,then use: "tc filter add dev eth0 parent 1: prio 5 protocol qroute u32 match u8 0x00 0x00 at 0 flowid 1:10". It will classify the all the qroute packet to flow 1:10. Now I want to further classify QRoute packet according to the first 2 bytes of the packet, I have tried to use tc filter add dev eth0 parent 1: prio 6 protocol qroute u32 match u8 0x40 0xff at 0 flowid 1:20", but it doesn't work! anyone know how to do it?

----- Original Message -----
From: "Liu Zhiyong" <[email protected]>
To: <[email protected]>
Sent: Wednesday, February 05, 2003 11:24 AM
Subject: [LARTC] to classify non-IP packet???

Quoted 21 lines

I implemented a new network protocol(called QRoute), the Eth protocol code is 0x8000(for unicast) and 0x8001(for multicast), and there are 2 kind of QRoute packets: data packet( the first 2 bytes is 0x40), and control packet(the fist 2 bytes is 0x00, 0x10,0x20 or 0x30). There are 3 kinds of packets in the network: IP packets, Qroute(including unicast and multicast) data packets, and Qroute control packet. I want to classify these 3 kinds of packets, how can I do it? I tried to use: "tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10" to classfiy the Qroute unicast packet, but it doesn't work. There is a protocol called "802.1Q" whose Eth protocol code is 0x8001(It can be found in "iproute2/lib/lI_proto.c"), so I tried to use "tc filter add dev eth0 parent 1:0 protocol 802.1Q prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", and it works. but it can't further classify the packets according to the first 2 bytes! And I tried to add protocol {0x8000, "QRoute"} in "iproute2/lib/lI_proto.c and compiled the iproute2 packet again, then tried " tc filter add dev eth0 parent 1:0 protocol QRoute prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", it still doesn't work! anyone can help me ? Thanks very much

Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Liu Zhiyong

I have successfully classified QRoute packet from IP packet by adding {0x8000, "qroute"} to /iproute2/lib/ll_protocol.c, and make iproute2 again,then use: "tc filter add dev eth0 parent 1: prio 5 protocol qroute u32 match u8 0x00 0x00 at 0 flowid 1:10". It will classify the all the qroute packet to flow 1:10. Now I want to further classify QRoute packet according to the first 2 bytes of the packet, I have tried to use tc filter add dev eth0 parent 1: prio 6 protocol qroute u32 match u8 0x40 0xff at 0 flowid 1:20", but it doesn't work! anyone know how to do it?

----- Original Message -----
From: "Liu Zhiyong" <[email protected]>
To: <[email protected]>
Sent: Wednesday, February 05, 2003 11:24 AM
Subject: [LARTC] to classify non-IP packet???

Quoted 21 lines

I implemented a new network protocol(called QRoute), the Eth protocol code is 0x8000(for unicast) and 0x8001(for multicast), and there are 2 kind of QRoute packets: data packet( the first 2 bytes is 0x40), and control packet(the fist 2 bytes is 0x00, 0x10,0x20 or 0x30). There are 3 kinds of packets in the network: IP packets, Qroute(including unicast and multicast) data packets, and Qroute control packet. I want to classify these 3 kinds of packets, how can I do it? I tried to use: "tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10" to classfiy the Qroute unicast packet, but it doesn't work. There is a protocol called "802.1Q" whose Eth protocol code is 0x8001(It can be found in "iproute2/lib/lI_proto.c"), so I tried to use "tc filter add dev eth0 parent 1:0 protocol 802.1Q prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", and it works. but it can't further classify the packets according to the first 2 bytes! And I tried to add protocol {0x8000, "QRoute"} in "iproute2/lib/lI_proto.c and compiled the iproute2 packet again, then tried " tc filter add dev eth0 parent 1:0 protocol QRoute prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", it still doesn't work! anyone can help me ? Thanks very much

Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Liu Zhiyong

I have successfully classified QRoute packet from IP packet by adding {0x8000, "qroute"} to /iproute2/lib/ll_protocol.c, and make iproute2 again,then use: "tc filter add dev eth0 parent 1: prio 5 protocol qroute u32 match u8 0x00 0x00 at 0 flowid 1:10". It will classify the all the qroute packet to flow 1:10. Now I want to further classify QRoute packet according to the first 2 bytes of the packet, I have tried to use tc filter add dev eth0 parent 1: prio 6 protocol qroute u32 match u8 0x40 0xff at 0 flowid 1:20", but it doesn't work! anyone know how to do it?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/