Skip to contentSkip to conversation

u32 filter rules

LARTC Remus 2 participants 3 messages Feb 12, 2003 – Feb 13, 2003

lore
Share & tools
lore
#1 lore raw
Quoted 5 lines · Remus

Hi folks,

Can I use in the same parent but for the diffrent classes u32 filter rules:
1) filtering by ip address (very low speed only for the Internet)
2) filtering by port (smb, smtp and pop3) for the local connection

Yes.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#2 lore raw
In reply to Remus

Hi,

Maybe I gave no examples what I want, sorry.

I have the outgoing trafic rules for the 3 local IPs (some rate, ceil and etc) and I can browse or do whereever from Internet side speed. But for the local net of these 3 IPs (ports smb, smtp and pop3) I would like to have 99Mbit speed.
I use the htb_ 0_8_3 script on eth1.
I can limit by IP for example 156k downlink but if I want to have for the same IP 99Mbit for local connection it does not work.

The same situation I have for my imq on eth1 to limit incoming trafic as well.

ADSL 512k/256k

            |  eth0
--------------------
| Linux box aka fw |
--------------------
            | eth1

Local net of the 3 PC

Any ideas/examples?

Thanks

Remus

Quoted 4 lines · Remus
Quoted 3 lines

Hi folks,

Can I use in the same parent but for the diffrent classes u32 filter

rules:

Quoted 5 lines
Quoted 2 lines

1) filtering by ip address (very low speed only for the Internet)
2) filtering by port (smb, smtp and pop3) for the local connection

Yes.

Stef

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/