Skip to contentSkip to conversation

Test tool - traffic generator.

LARTC Emmanuel Guiton 7 participants 16 messages Feb 20, 2003 – Feb 25, 2003

lore
Share & tools
lore
#0 lore raw

Hi!

Does anyone know a good traffic generator that can be implemented on the same machine than the one which implement traffic control?
I have a "test network" (2 hosts). One of the machines is a router on which I want to test my traffic control settings. This router is supposed to be at the interface of two networks: mine and another one that does not exist in fact. As I have to simulate traffic coming from the non-existent network, I'm looking for a tool that I could install on the router and that won't bypass the traffic control (as for example the kernel traffic generator does).

Any good suggestion?

Br,
Emmanuel

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines

Have you tried netperf ?
Search on google if you have not heard of it.

Thanks, however it seems that it does not fit with my needs. Netperf works with client/server mode while I just need a tool capable of sending traffic on the network (and particularly to non-existent machines :) ) and without any "receveir" (I use a packet sniffer on the other machine).

Cheers
Emmanuel

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Emmanuel Guiton
Quoted 8 lines · Emmanuel Guiton
Quoted 2 lines

Have you tried netperf ?
Search on google if you have not heard of it.

Thanks, however it seems that it does not fit with my needs. Netperf works with client/server mode while I just need a tool capable of sending traffic on the network (and particularly to non-existent machines :) ) and without any "receveir" (I use a packet sniffer on the other machine).

Try an udp traffic generator.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Emmanuel Guiton

On 20-02-2003 at 05:47:07PM +0200, Emmanuel Guiton wrote:
EG> Hi!
EG>
EG> Does anyone know a good traffic generator that can be implemented on the EG> same machine than the one which implement traffic control? EG> I have a "test network" (2 hosts). One of the machines is a router on EG> which I want to test my traffic control settings. This router is EG> supposed to be at the interface of two networks: mine and another one EG> that does not exist in fact. As I have to simulate traffic coming from EG> the non-existent network, I'm looking for a tool that I could install on EG> the router and that won't bypass the traffic control (as for example the EG> kernel traffic generator does).
EG>
EG> Any good suggestion?
EG>
hping
http://www.hping.org

Rgds,
Bartek.
--

GPG-key-ID:  0x948DE45D -- visit http://www.keyserver.net
Fingerprint: 95E9 8E2D 1801 7864 2244  6EAA 03E5 764D 948D E45D

The great baby you see there is not yet out of his swaddling-clouts.
Shakespeare, Hamlet.

#4 lore raw
In reply to Emmanuel Guiton
Quoted 18 lines · Bartek Krajnik

On 20-02-2003 at 05:47:07PM +0200, Emmanuel Guiton wrote:
EG> Hi!
EG>
EG> Does anyone know a good traffic generator that can be implemented on the EG> same machine than the one which implement traffic control? EG> I have a "test network" (2 hosts). One of the machines is a router on EG> which I want to test my traffic control settings. This router is EG> supposed to be at the interface of two networks: mine and another one EG> that does not exist in fact. As I have to simulate traffic coming from EG> the non-existent network, I'm looking for a tool that I could install on EG> the router and that won't bypass the traffic control (as for example the EG> kernel traffic generator does).
EG>
EG> Any good suggestion?
EG>
hping
http://www.hping.org

Quoted 2 lines

Rgds,
Bartek.

I tried spak (Send Packet: http://www.xenos.net/software/spak/). Although it is quite configurable, I found that the rate of sending packets is slow as the a different program is required to be run for different layers. For example to send a TCP packet, we would have to run maketcp then makeip and finally sendpacket. Thus for each packet sent out we have to execute 3 programs. This slows down the sending rate very much. I tried to send some 10000 packets and the rate I saw was something like 1 packet/sec. Maybe it could work for your case.

Thanks,
Ashok
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#5 lore raw
In reply to Emmanuel Guiton
Quoted 18 lines · Bartek Krajnik

On 20-02-2003 at 05:47:07PM +0200, Emmanuel Guiton wrote:
EG> Hi!
EG>
EG> Does anyone know a good traffic generator that can be implemented on the EG> same machine than the one which implement traffic control? EG> I have a "test network" (2 hosts). One of the machines is a router on EG> which I want to test my traffic control settings. This router is EG> supposed to be at the interface of two networks: mine and another one EG> that does not exist in fact. As I have to simulate traffic coming from EG> the non-existent network, I'm looking for a tool that I could install on EG> the router and that won't bypass the traffic control (as for example the EG> kernel traffic generator does).
EG>
EG> Any good suggestion?
EG>
hping
http://www.hping.org

Quoted 2 lines

Rgds,
Bartek.

Following on this, does anybody know of traffic generator which can take a network address as target and send packets to each address in that network? In using spak (http://www.xenos.net/software/spak/) I had to write a script to send packets to each address in the network because the generator accepts only a single IP address as target.

Thanks,
Ashok
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#6 lore raw
In reply to Emmanuel Guiton

l

Quoted 5 lines

Following on this, does anybody know of traffic generator which can take a network address as target and send packets to each address in that network? In using spak (http://www.xenos.net/software/spak/) I had to write a script to send packets to each address in the network because the generator accepts only a single IP address as target.

mgen. UDP only, though.

http://manimac.itd.nrl.navy.mil/MGEN/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#7 lore raw
In reply to Emmanuel Guiton
Quoted 8 lines

mgen. UDP only, though.

http://manimac.itd.nrl.navy.mil/MGEN/

Well, as Stef said, anyway that's why I need (because UDP won't ask for replies)
However, the problem I encountered with MGEN is that it does not accept to blindly send udp packets: it first try to resolve the address of the remote station (which in my case does not exist).
As I was away, I've just started again to look seriously at the problem so I still have to try Bartek and Ashok solutions.
Up to know, I've discarded:
- linux's kernel traffic generator: it bypasses traffic control
- ttcp because TCP does not suit in my case
- tg: because of an installation error :) Too lazy to even check in
the documentation if it worths tring to install it.
- mgen: as I said above, it doesn't accept to blindly sens udp
packets but first try to resolve the remote address
- ping -f: flooding is ok, but I cannot modify parameters (ports,
adresses) as I'd like to (well, I could start many pings with different parameters at once) and it needs acknowledgements.

And I still have to try:
- udpgen: I have to modify the makefile to install it
- hping2
- spak

Tahnk you guys anyway.
By the way, Ashok you may find something that fits your needs in that list.

Emmanuel

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#9 lore raw
In reply to Emmanuel Guiton
Quoted 8 lines · David Boreham
Quoted 3 lines

- ttcp because TCP does not suit in my case

ttcp will send UDP packets.

You're right.
However, I cannot send on my network address (segmentation fault) nor on a non-existent address (it wants to resolve the remote address).

Thanks anyway.

Emmanuel who has really annoying needs

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#10 lore raw
In reply to Emmanuel Guiton
Quoted 2 lines

However, I cannot send on my network address (segmentation fault) nor on a non-existent address (it wants to resolve the remote address).

What do you mean by "wants to resolve the remote address" ?

I can send UDP packets to addresses which have no node listening with ttcp just fine.

I can send UDP packets to a broadcast address with ttcp too.

Can you post an example of you trying and whatever failure you see ?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#11 lore raw
In reply to Emmanuel Guiton
Quoted 4 lines

What do you mean by "wants to resolve the remote address" ?

I mean that the only packets sent on the network are ARP packets like these ones for example:

02/21-16:27:07.393165 ARP who-has 10.0.0.25 tell 10.10.10.11

02/21-16:27:08.393168 ARP who-has 10.0.0.25 tell 10.10.10.11

10.10.10.25 is the fake address I used and 10.10.10.11 is the emitting station.

Quoted 7 lines

I can send UDP packets to addresses which have no node listening with ttcp just fine.

I can send UDP packets to a broadcast address with ttcp too.

You make me dream. I hope I'm just misusing ttcp because I despair of finding the right soft.

Quoted 4 lines

Can you post an example of you trying and whatever failure you see ?

Sure:
I used the example from the README file.
./ttcp4 -t -s 10.0.0.25

On my second station I get the ARP packets above.
On the emitting station, ttcp quit after a while with these messages:

ttcp-t: connect: No route to host
Segmentation fault

Any clue?

Emmanuel who is seeing the bright light of hope

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#12 lore raw
In reply to Emmanuel Guiton
Quoted 1 line

02/21-16:27:07.393165 ARP who-has 10.0.0.25 tell 10.10.10.11

Clearly if you are sending on a LAN then you will need to make a fake ARP cache entry for your non-existent node.

see: man arp

Quoted 2 lines

ttcp-t: connect: No route to host
Segmentation fault

This means that somehow you've got the broadcast address wrong. There's no route to that address from your machine.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#13 lore raw
In reply to Emmanuel Guiton

: > 02/21-16:27:07.393165 ARP who-has 10.0.0.25 tell 10.10.10.11 : Clearly if you are sending on a LAN then you will need to : make a fake ARP cache entry for your non-existent node. : see: man arp

I agree with David....see also:

http://linux-ip.net/html/tools-arp.html

http://linux-ip.net/html/tools-ip-neighbor.html
http://linux-ip.net/html/tools-ip-neighbor.html#ex-tools-ip-neighbor-add

If you enter an address into the ARP cache (neighbor table) for 10.10.10.11 on 10.0.0.25, the linux box will know where to send the frames.

Then, you can flood your network with UDP packets to an IP that isn't on the wire. This will allow you to exercise your traffic control.

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#14 lore raw
In reply to Emmanuel Guiton
Quoted 12 lines · Martin A. Brown

: > 02/21-16:27:07.393165 ARP who-has 10.0.0.25 tell 10.10.10.11 : Clearly if you are sending on a LAN then you will need to : make a fake ARP cache entry for your non-existent node. : see: man arp

I agree with David....see also:

http://linux-ip.net/html/tools-arp.html

http://linux-ip.net/html/tools-ip-neighbor.html
http://linux-ip.net/html/tools-ip-neighbor.html#ex-tools-ip-neighbor-add

Quoted 11 lines

If you enter an address into the ARP cache (neighbor table) for 10.10.10.11 on 10.0.0.25, the linux box will know where to send the frames.

Then, you can flood your network with UDP packets to an IP that isn't on the wire. This will allow you to exercise your traffic control.

-Martin

You're right. It's working fine now.
Thanks to both of you.

Emmanuel who's enlighted now (at least a bit).

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#15 lore raw
In reply to Emmanuel Guiton
Quoted 27 lines · Emmanuel Guiton
Quoted 3 lines

mgen. UDP only, though.

http://manimac.itd.nrl.navy.mil/MGEN/

Well, as Stef said, anyway that's why I need (because UDP won't ask for replies)
However, the problem I encountered with MGEN is that it does not accept to blindly send udp packets: it first try to resolve the address of the remote station (which in my case does not exist).
As I was away, I've just started again to look seriously at the problem so I still have to try Bartek and Ashok solutions.
Up to know, I've discarded:
- linux's kernel traffic generator: it bypasses traffic control
- ttcp because TCP does not suit in my case
- tg: because of an installation error :) Too lazy to even check in
the documentation if it worths tring to install it.
- mgen: as I said above, it doesn't accept to blindly sens udp
packets but first try to resolve the remote address
- ping -f: flooding is ok, but I cannot modify parameters (ports,
adresses) as I'd like to (well, I could start many pings with different parameters at once) and it needs acknowledgements.

And I still have to try:
- udpgen: I have to modify the makefile to install it
- hping2
- spak

Quoted 6 lines

Tahnk you guys anyway.
By the way, Ashok you may find something that fits your needs in that list.

Emmanuel

Thanks to all who gave pointers. However none of these tools accept a network address for target. So I have to execute the programs once for each target address. I wanted to check the multipath routing code and so required that the packets have different destination IP addresses. So I wrote a small program to generate packets to a range of addresses.

Thanks again,
Ashok
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/