SFQ (traffic shaping) over 2 interfaces
Del,
I have not used it, but IMQ appears to be the answer to your problem.
Read about it here:
http://luxik.cdi.cz/~patrick/imq/
http://luxik.cdi.cz/~patrick/imq/faq.html
And here:
http://lartc.org/howto/lartc.imq.html
-Martin
: I'd like to apply Stochastic Fairness Queueing (SFQ) to two downstream : interfaces, so neither of those networks can hog all the bandwidth, to : the detriment of the other. I'm not concerned with limiting to a rate, : just keeping them as equal as possible so both nets get an equal chance : at the bandwidth.
: Is it possible to use SFQ on two interfaces in this way?
:
: setup:
: RedHat Linux kernel 2.4.18-24
:
: eth1 ip a.a.a.x/24
: eth2 ip a.a.a.x/24
: wan1 ip b.b.b.x/30 T1
:
: Thanks,
: Del
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/