'tc' locked my machine...
Newbe...
I am following the Linux Advanced Routing & Traffic Control HOWTO, as I am having difficulty with a satelite ADSL connection.
Section 9.2.2.2 describes a case identicle to mine, and surgests throttle using 'tc'. On a test machine I entered:
# tc qdisc add dev eth1 root btf rate 64kbit latency 50ms burst 1500
When I enter 'tc qdisc show' I get:
disc tbf 8001: dev eth1 rate 64Kbit burst 1499b lat 60.9ms
But, I now find my ftp failes. In either direction. It creates a file of 0 bytes, then stalles for ever more.
Also I have no 'man tc' and I can't remove this entry in any logical way (like with 'tc qdisc del dev eth1') I can think of.
Can anybody please let me know how I get ftp to work with the Token Bucket Filter, and how to remove the entry once it's been entered...
Thanks greatly in advance,
Ben
PS, kernel 2.4.19
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Tc qd del dev eth1 root
Will do the trick. Take the wondershaper script from the lartc site. It handles exactly whawt you have in mind.
Mohan
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Ben Clewett
Sent: Thursday, March 06, 2003 8:09 PM
To: [email protected]
Subject: [LARTC] 'tc' locked my machine...
Newbe...
I am following the Linux Advanced Routing & Traffic Control HOWTO, as I am having difficulty with a satelite ADSL connection.
Section 9.2.2.2 describes a case identicle to mine, and surgests throttle using 'tc'. On a test machine I entered:
# tc qdisc add dev eth1 root btf rate 64kbit latency 50ms burst 1500
When I enter 'tc qdisc show' I get:
disc tbf 8001: dev eth1 rate 64Kbit burst 1499b lat 60.9ms
But, I now find my ftp failes. In either direction. It creates a file of 0 bytes, then stalles for ever more.
Also I have no 'man tc' and I can't remove this entry in any logical way
(like with 'tc qdisc del dev eth1') I can think of.
Can anybody please let me know how I get ftp to work with the Token Bucket Filter, and how to remove the entry once it's been entered...
Thanks greatly in advance,
Ben
PS, kernel 2.4.19
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/