Sorry about last post in HTML
Sorry about previous posting in HTML. Here it is in plaintext
--------------------------------------------------------------
Was wondering if someone can more or less come up with something newbie'ish for me to quickly and easily limit
traffic to one host on my Nat'd network (192.168.0.60 for instance is using 90% of the bandwidth most of the time in our
12 machine network) mostly DCC's on IRC. Is there a quick and super simple way to do it with tc/cbq etc ?
eth0 - global interface to net (10mps card)
eth1 - local (to switch feeding NAT'd machines) (100mps card)
using a cable modem connect (2670 kbps downstream, 1156 kbps upstream, measured via dslreports.com)
Need a way to limit bandwidth to one particular machine on the 192.168.x.x network.Don't even need to divide up bandwidth like most cbq tutorials discuss. I think it involves the ingress filter but not sure. If someone could write a simple tc script that would limit bandwidth to an ip (ie:192.168.0.61) on our network to say 25-50k/s or there abouts. I've used the wondershaper script here at home but no overly useful in the case of work and the need for me to become a Bandwidth Nazi. I've used IPTraf and
it pretty much tells the tale.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
George,
Sadly, traffic control is not "quick and easy" (yet). It's far easier than it used to be, though, so here's a quick checklist of things you can do that should make it easier for you to get to where you want to go:
- install kernel 2.4.20
- get tc HTB from devik's site (http://luxik.cdi.cz/~devik/qos/htb/)
- take a look at the wondershaper (http://lartc.org/wondershaper/)
- take a look at my script (http://linux-ip.net/htb-script)
And take a stab at it.
Here's a quick run down of what I would do:
DEV=eth1
BANDWIDTH44kbit
CAP%6kbit
FWMARK=7
tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1:1 classid 1:10 \
htb rate $BANDWIDTH ceil $BANDWIDTH
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10 tc class add dev $DEV parent 1:1 classid 1:20 \
htb rate $CAP ceil $CAP
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10 tc filter add dev $DEV parent 1:0 protocol ip \
handle $FWMARK fw classid 1: 1:20
iptables -t mangle -I PREROUTING -s 192.168.0.60 \
-j MARK --set-mark $FWMARK
That should put only packets from 192.168.0.60 into the 1:20 class, which has the capped bandwidth.
Others on this list may have better ideas about how to break up your bandwidth to cap the bandwidth hog.
Good luck,
-Martin
: Sorry about previous posting in HTML. Here it is in plaintext : -------------------------------------------------------------- : Was wondering if someone can more or less come up with something : newbie'ish for me to quickly and easily limit
: traffic to one host on my Nat'd network (192.168.0.60 for instance is : using 90% of the bandwidth most of the time in our
: 12 machine network) mostly DCC's on IRC. Is there a quick and super : simple way to do it with tc/cbq etc ?
:
: eth0 - global interface to net (10mps card)
: eth1 - local (to switch feeding NAT'd machines) (100mps card) :
:
: using a cable modem connect (2670 kbps downstream, 1156 kbps upstream, : measured via dslreports.com)
:
:
: Need a way to limit bandwidth to one particular machine on the : 192.168.x.x network.Don't even need to divide up bandwidth : like most cbq tutorials discuss. I think it involves the ingress filter : but not sure. If someone could write a simple tc script that would : limit bandwidth to an ip (ie:192.168.0.61) on our network to say : 25-50k/s or there abouts. I've used the wondershaper script : here at home but no overly useful in the case of work and the need for : me to become a Bandwidth Nazi. I've used IPTraf and
: it pretty much tells the tale.
:
:
:
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/