Skip to contentSkip to conversation

some problems with the tc command

LARTC Jose Luis Pradas Adán 2 participants 2 messages Mar 11, 2003

lore
Share & tools
lore
#0 lore raw

Hello everyone!

I have some problems with the tc command.
I write the same commands as in the manual but it gives me an error. I write: "tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000" for example but it doesn't work. I have similar problems with "tc qdisc add dev eth0 root handle 1: prio" I don't find the solution. I have the 2.4.18 kernel version.
Does anyone know why it doesn't work properly?

Regards to all and thank you in advance!

#1 lore raw
Quoted 9 lines · Jose Luis Pradas Adán

Hello everyone!

I have some problems with the tc command.
I write the same commands as in the manual but it gives me an error. I
write: "tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000" for example but it doesn't work. I have similar problems with "tc qdisc add dev eth0 root handle 1: prio" I don't find the solution. I have the 2.4.18 kernel version.
Does anyone know why it doesn't work properly?

You say "it doesn't work". Can you be more specific? Can you execute the commands without error?

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/