Skip to contentSkip to conversation

howto mark packet's dscp value

LARTC Philip Ho 3 participants 5 messages Mar 13, 2003 – Mar 17, 2003

lore
Share & tools
lore
#1 lore raw

On Thu, Mar 13, 2003 at 03:56:48PM +0800, Philip Ho wrote:
PH>Dear all

PH>can anyone tell me how to mark packet's DSCP value using tc?

You must use iptable not tc
iptable -t mangle -A <chain> <conditions> -s DSCP --set-dscp <num>

Signature · 6 lines
Best regard, Aleksander Trotsai aka MAGE-RIPE aka MAGE-UANIC
My PGP key at ftp://blackhole.adamant.ua/pgp/trotsai.key[.asc]
Big trouble - user to computer ration too low.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Philip Ho
Quoted 4 lines

can anyone tell me how to mark packet's DSCP value using tc?

Hi,

You can use the dsmark qdisc. Something like (example):

tc qdisc add dev $DEV handle 1:0 root dsmark indices 64 set_tc_index (...)
tc class change $DEV parent 1:0 classid 1:1 dsmark 0x3 value 0xb8 # EF (...)
tc filter add dev $DEV parent 1:0 prio 4 u32 ip dst y.y.y.y classid 1:1

This way, packets going to y.y.y.y get EF mark.

Iproute2 packages comes with some examples. The "Differentiated Services on Linux" draft by Almesberger, Jamal and Alexey Kuznetsov is another good source, including commented and easy to understand examples.

Regards,
Joana Urbano

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.459 / Virus Database: 258 - Release Date: 25-02-2003

author
#3 lore raw
In reply to Philip Ho

Dear Joana

I guess dsmark qdisc is runned before iptables PREROUTING phase, right?

Regards,
philip

Quoted 23 lines · Maria Joana Urbano
Quoted 3 lines

can anyone tell me how to mark packet's DSCP value using tc?

Hi,

You can use the dsmark qdisc. Something like (example):

tc qdisc add dev $DEV handle 1:0 root dsmark indices 64 set_tc_index (...)
tc class change $DEV parent 1:0 classid 1:1 dsmark 0x3 value 0xb8 # EF (...)
tc filter add dev $DEV parent 1:0 prio 4 u32 ip dst y.y.y.y classid 1:1

This way, packets going to y.y.y.y get EF mark.

Iproute2 packages comes with some examples. The "Differentiated Services on Linux" draft by Almesberger, Jamal and Alexey Kuznetsov is another good source, including commented and easy to understand examples.

Regards,
Joana Urbano

Quoted 6 lines

------------------------------------------------------------------------

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.459 / Virus Database: 258 - Release Date: 25-02-2003

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Philip Ho

Hi Philip,

Quoted 2 lines

I guess dsmark qdisc is runned before iptables PREROUTING phase, right?

Hummm, I actually use dsmark after all iptables hooks, at the QoS Egress, just before the packet leaves the interface (please see KPTD at www.docum.org).

Probably you can do it before the routing code, using the IMQ, but I haven't try it and I am not sure if this is possible...

Regards,
Joana Urbano

Quoted 23 lines
Quoted 23 lines
Quoted 3 lines

can anyone tell me how to mark packet's DSCP value using tc?

Hi,

You can use the dsmark qdisc. Something like (example):

tc qdisc add dev $DEV handle 1:0 root dsmark indices 64 set_tc_index (...)
tc class change $DEV parent 1:0 classid 1:1 dsmark 0x3 value 0xb8 # EF (...)
tc filter add dev $DEV parent 1:0 prio 4 u32 ip dst y.y.y.y classid 1:1

This way, packets going to y.y.y.y get EF mark.

Iproute2 packages comes with some examples. The "Differentiated Services on Linux" draft by Almesberger, Jamal and Alexey Kuznetsov is another good source, including commented and easy to understand examples.

Regards,
Joana Urbano