Skip to contentSkip to conversation

Public Router using Private Links

LARTC Walter D. Wyndroski 2 participants 3 messages Mar 25, 2003

lore
Share & tools
lore
#0 lore raw

I am running a public core router using private links from my provider.

Details:
RH7.3
9 interfaces (all Intel)
eth0 is default gateway and has a private IP address all other interfaces are links to other routers or networks eth3 has a public IP address

The core router will rarely need to access sites out on the internet, but when it does it cannot get there because the eth0 has a private IP address. Is there a way to force the router to use the ip address from eth3 to access sites on the internet? If so, how would I route traffic originating from eth3 to the internet? I have tried a few policy statements coupled with some separate rules and tables to no avail. All I am getting is Destination host unreachable when I issue the command "ping -v -I eth3 www.yahoo.com".

Please advise. Thank you in advance.

Walt

Signature · 3 lines
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
#1 lore raw

Walt,

Try this....the "src" keyword is a hint to the kernel about what address to select on a given route. This will only work if the kernel is asked to select the source IP based on a route.

# ip route change default via $CURRENTGATEWAY src $IP_ON_ETH3

This might work before the change:

# ping -n -v -I $IP_ON_ETH3 www.yahoo.com

See also:

http://linux-ip.net/html/routing-saddr-selection.html
http://linux-ip.net/gl/ip-cref/node155.html

Good luck,

-Martin

: I am running a public core router using private links from my provider. :
: Details:
: RH7.3
: 9 interfaces (all Intel)
: eth0 is default gateway and has a private IP address
: all other interfaces are links to other routers or networks : eth3 has a public IP address
:
: The core router will rarely need to access sites out on the internet, : but when it does it cannot get there because the eth0 has a private IP : address. Is there a way to force the router to use the ip address from : eth3 to access sites on the internet? If so, how would I route traffic : originating from eth3 to the internet? I have tried a few policy : statements coupled with some separate rules and tables to no avail. All : I am getting is Destination host unreachable when I issue the command : "ping -v -I eth3 www.yahoo.com".
:
: Please advise. Thank you in advance.
:
: Walt
:

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Walter D. Wyndroski

Thank you sooo much!!! That worked perfectly. Also thanks for the links to the nice documentation. I've been looking for similar documentation for a couple of weeks now.

Walt

----- Original Message -----
From: "Martin A. Brown" <[email protected]>
To: "Walter D. Wyndroski" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, March 25, 2003 11:50 AM
Subject: Re: [LARTC] Public Router using Private Links

Quoted 55 lines

Walt,

Try this....the "src" keyword is a hint to the kernel about what address to select on a given route. This will only work if the kernel is asked to select the source IP based on a route.

# ip route change default via $CURRENTGATEWAY src $IP_ON_ETH3

This might work before the change:

# ping -n -v -I $IP_ON_ETH3 www.yahoo.com

See also:

http://linux-ip.net/html/routing-saddr-selection.html
http://linux-ip.net/gl/ip-cref/node155.html

Good luck,

-Martin

: I am running a public core router using private links from my provider. :
: Details:
: RH7.3
: 9 interfaces (all Intel)
: eth0 is default gateway and has a private IP address
: all other interfaces are links to other routers or networks : eth3 has a public IP address
:
: The core router will rarely need to access sites out on the internet, : but when it does it cannot get there because the eth0 has a private IP : address. Is there a way to force the router to use the ip address from : eth3 to access sites on the internet? If so, how would I route traffic : originating from eth3 to the internet? I have tried a few policy : statements coupled with some separate rules and tables to no avail. All : I am getting is Destination host unreachable when I issue the command : "ping -v -I eth3 www.yahoo.com".
:
: Please advise. Thank you in advance.
:
: Walt
:

--
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

Signature · 8 lines
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/