Skip to contentSkip to conversation

Problem with ipsec tool from Marcus Mueller

LARTC David Hellekalek 2 participants 2 messages Mar 27, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I am trying to connect road-warriors (running on WinXP) to my home network via FreeS/WAN but it does not work.
I am using version 1.99 with "plutodebug=all" set in the config but it does not give any output when I try to connect.

The client is behind a router in network 192.168.20.0/24, the server is on "my-servers-dns-name" with the internal network 192.168.11.0/24

When I did "ping 192.168.11.1", it said "IP Sicherheit wird verhandelt" which means "Negotiating IP security" but the packet logger which was running on the client's router did not log any traffic from/to the server so it seems that WinXP did not attempt to contact the server. The syslog on the server of course also did not show anything about connection attempts. Do you have any idea why this happens?

Here are the configs:

- Config on the client:

conn roadwarrior
left=%any
right=my-servers-dns-name
rightca="C=AT, S=xx, L=xx, O=xx, CN=xx"
network=auto
auto=start
pfs=yes

conn roadwarrior-net
left=%any
right=my-servers-dns-name
rightsubnet2.168.10.0/24
rightca="C=AT, S=xx, L=xx, O=xx, CN=xx"
network=auto
auto=start
pfs=yes
---------------------

- Log on the client
No RAS connections found.
IPSec Version 2.1.4 (c) 2001,2002 Marcus Mueller
Getting running Config ...
Microsoft's Windows XP identified
Host name is: pc1
LAN IP address: 192.168.20.1
Setting up IPSec ...

Deactivating old policy...
Removing old policy...

Connection roadwarrior:
MyTunnel : 192.168.20.1
MyNet : 192.168.20.1/255.255.255.255
PartnerTunnel: my-servers-dns-name

 PartnerNet   : my-servers-dns-name/255.255.255.255
 CA (ID)      : C=AT, S=xx, L=xx, O=xx, CN...
 PFS          : y
 Auto         : start
 Auth.Mode    : MD5
 Rekeying     : 3600S/50000K

Activating policy...

Connection roadwarrior-net:
MyTunnel : 192.168.20.1
MyNet : 192.168.20.1/255.255.255.255
PartnerTunnel: my-servers-dns-name

 PartnerNet   : 192.168.11.0/255.255.255.0
 CA (ID)      : C=AT, S=xx, L=xx, O=xx, CN...
 PFS          : y
 Auto         : start
 Auth.Mode    : MD5
 Rekeying     : 3600S/50000K

Activating policy...
---------------------------

- Config on the server:

config setup
interfaces=%defaultroute
klipsdebug=none
plutodebug=all
plutoload=%search
plutostart=%search
uniqueids=yes

conn %default
keyingtries=1
compress=yes
disablearrivalcheck=no
authby=rsasig
leftrsasigkey=%cert
rightrsasigkey=%cert

conn roadwarrior-net

        leftsubnet2.168.11.0/24
        also=roadwarrior

conn roadwarrior
right=%any
left=%defaultroute
leftcert=gatewayKey.pem
auto­d
pfs=yes

------------

I hope that you can help me
Regards,
David

PS: I don't want to connect both routers, I want that only the single client has access.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

David,

Sorry, wrong list! Please try the FreeS/WAN list.

http://www.freeswan.org/freeswan_trees/freeswan-1.5/doc/mail.html

-Martin

: I am trying to connect road-warriors (running on WinXP) to my home network : via FreeS/WAN but it does not work.
: I am using version 1.99 with "plutodebug=all" set in the config but it does : not give any output when I try to connect.
:
: The client is behind a router in network 192.168.20.0/24, the server is on : "my-servers-dns-name" with the internal network 192.168.11.0/24 :
: When I did "ping 192.168.11.1", it said "IP Sicherheit wird verhandelt" : which means "Negotiating IP security" but the packet logger which was : running on the client's router did not log any traffic from/to the server so : it seems that WinXP did not attempt to contact the server. The syslog on the : server of course also did not show anything about connection attempts. : Do you have any idea why this happens?
:
: Here are the configs:
:
: - Config on the client:
:
: conn roadwarrior

 :  left=%any
 :  right=my-servers-dns-name
 :  rightca="C=AT, S=xx, L=xx, O=xx, CN=xx"
 :  network=auto
 :  auto=start
 :  pfs=yes
 :
 : conn roadwarrior-net
 :  left=%any
 :  right=my-servers-dns-name
 :  rightsubnet2.168.10.0/24
 :  rightca="C=AT, S=xx, L=xx, O=xx, CN=xx"
 :  network=auto
 :  auto=start
 :  pfs=yes
 : ---------------------
 :
 : - Log on the client
 : No RAS connections found.
 : IPSec Version 2.1.4 (c) 2001,2002 Marcus Mueller
 : Getting running Config ...
 : Microsoft's Windows XP identified
 : Host name is: pc1
 : LAN IP address: 192.168.20.1
 : Setting up IPSec ...
 :
 :  Deactivating old policy...
 :  Removing old policy...
 :
 : Connection roadwarrior:
 :  MyTunnel     : 192.168.20.1
 :  MyNet        : 192.168.20.1/255.255.255.255
 :  PartnerTunnel: my-servers-dns-name
 :  PartnerNet   : my-servers-dns-name/255.255.255.255
 :  CA (ID)      : C=AT, S=xx, L=xx, O=xx, CN...
 :  PFS          : y
 :  Auto         : start
 :  Auth.Mode    : MD5
 :  Rekeying     : 3600S/50000K
 :  Activating policy...
 :
 : Connection roadwarrior-net:
 :  MyTunnel     : 192.168.20.1
 :  MyNet        : 192.168.20.1/255.255.255.255
 :  PartnerTunnel: my-servers-dns-name
 :  PartnerNet   : 192.168.11.0/255.255.255.0
 :  CA (ID)      : C=AT, S=xx, L=xx, O=xx, CN...
 :  PFS          : y
 :  Auto         : start
 :  Auth.Mode    : MD5
 :  Rekeying     : 3600S/50000K
 :  Activating policy...
 : ---------------------------
 :
 : - Config on the server:
 :
 : config setup
 :         interfaces=%defaultroute
 :         klipsdebug=none
 :         plutodebug=all
 :         plutoload=%search
 :         plutostart=%search
 :         uniqueids=yes
 :
 : conn %default
 :         keyingtries=1
 :         compress=yes
 :         disablearrivalcheck=no
 :         authby=rsasig
 :         leftrsasigkey=%cert
 :         rightrsasigkey=%cert
 :
 : conn roadwarrior-net
 :         leftsubnet2.168.11.0/24
 :         also=roadwarrior
 :
 : conn roadwarrior
 :         right=%any
 :         left=%defaultroute
 :         leftcert=gatewayKey.pem
 :         auto­d
 :         pfs=yes

:
: ------------
:
: I hope that you can help me
: Regards,
: David
:
: PS: I don't want to connect both routers, I want that only the single client : has access.
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/